GB 09.2011 ENGINEERED SYSTEMS Applications Teguflex® Viton®, also well-known as Teguflex® FP, is suitable for a variety of applications, where aggressive chemicals (strong acids, aromatic solvents or hydrocarbons and fuels) or high temperature products are involved. Beside the standard grade, many other special kinds of Viton, formulated to satisfy different resistance requirements, can meet the best performance in every particular case. Please, ask our commercial team. Compensate for thermal elongation and misalignment. Isolate vibrations, dampen noise and pressure surges, in connection with pipes, pumps, etc. Do not use either low molecular weight ethers nor ketones applications. Teguflex® Viton® Trelleborg TF Expansion Joints DN 25-DN 300 Main properties • Excellent ozone and weather resistance. • Low deformation on compression at high temperature. • orking temperature: Satisfactory results W from -15ºC to 150ºC. Design Teguflex® Viton® expansion joint is composed of a special fluor-elastomeric compound (VITON®), suitable for extremely tough applications and aramide fabric reinforcement, ensuring a long service life with remained properties. Building length 130/150/200 mm. Turnable flanges. Our ranges Trelleborg S and Trelleborg FFI can also be manufactured in a Viton® quality. For further information, please contact us. Materials Colour Label Inner tube Outer cover Max. temp. o C Double Purple Viton® Viton® 150o Applications Highly aggressive chemicals and/or high temperature. Note: Viton® is a registered trademark of Dupont Dow Elastomer. Pressure rating Pressure Max. working pressure Test pressure Burst pressure BL130-200 Temperature DN 25 DN 150 DN 200 DN 300 90oC 150oC 10 bar 8 bar 8 bar 6 bar 20oC 16 bar 12 bar 20oC >40 bar >30 bar