Novibra® AV Plate Features The AV Plate, made of oil and grease resistant rubber material, is available either as a single (4.5 mm) or as a double (8 mm) version. The single version has ribs on one side only, while the double has ribs on both sides applied at a 90 degree angle to each other. Good performance is obtained when using the Novibra AV Plate in the building and construction industry as support pads between flooring and joists. This application provides for cushioning of loads and isolation of high frequency vibrations within the building. ® type AV Plate The Anti-Vibration Plate is intended, primarily, for applications with low requirement for vibration isolation. Typical installations are machinery generating vibrations in the high frequency range, and tall unstable installations, requiring secure attachments to the foundation. If insufficient deflection is achieved with a single layer, multiple layers can be used by separating each layer with a weight distributing steel plate. In order to avoid direct contact between machine and foundation, a rubber bushing (e.g. rubber hose) should be installed in the mounting holes prior to installation of bolt and rubber washer. Pleases see “Mounting instructions” on this page. Suitable applications are: Pillar drills Transformers Large pumps Industrial fans Printing presses Textile machinery Large forging presses Horizontal drill presses Single Plate Double Plate AV Double Plate AV Double Plate M-Max Load (Kg/cm²)

Single Novibra® AV Plate Load kp/cm² Mpa 5 Static Deflection Double Novibra® AV Plate kp/cm² Mpa 5 0.5 Static Deflection