Cushyfoot™ Features Cushyfoot™ mountings have two rubber elements, used in shear and compression, to provide excellent stiffness characteristics for the isolation of a wide range of vibration frequencies. There are three sizes, 17-0290 for loads up to 230 kg per mounting, 17-0213 for loads up to 1250 kg and 17-0346, which will carry up to 1280 kg per mounting, but will provide up to 16 mm static deflection. The Cushyfoot™ mounting has the following features: A wide load range from 50 to 1280 kg. type Cushyfoot™ Dissimilar horizontal stiffnesses give optimum vibration isolation Cushyfoot™ mountings are suitable for many different types of machinery, e.g. diesel engines, generator sets, compressors, fans, hydraulic units and lift machinery. and motion control. Strong castings for safety and reliability. Stamped identification plates for product identification.

Note: The natural frequencies and degrees of isolation are based on dynamic characteristics of the mountings. To select correct mounting, following data Select correct load line in diagram 1 and correct interference line in diagram 3. The load line intersects with required type Connect this intersection point vertically down to the interference line in diagram 3. Here, on the sloping curve, the isolation For static deflection, see diagram 2.