Conical Bearing Features Conical bearings are used usually in pairs to transfer radial & axial loads but allowing large torsional movement and some conical. ese are therefore suitable in applications where controlled flexibility is required such as in large travel suspension systems. e high accuracy components provide – High fatigue life – Wide radial load range – High torsional movement Each bush comprises of a high tolerance conical metals with high quality natural rubber compounds featuring low creep and high tear and tensile properties. is provides for high fatigue resistance at high loads and movements. ey provide good shock attenuation whilst providing good control in the radial and axial directions. The conical bearings shall be mounted in pairs and preloaded axial rougly 7 mm each. Installed with an axial pre-load. Trelleborg Industrial AVS operates a policy of continuous improvement and development. We reserve the right to change design and specification of our products without prior notification or alteration of literature. We will not be held responsible for any danger or damage incurred through improper use or inst

Suspension spring Features Each component is manufactured from high strength steel with high impact and wear characteristics with heavy-duty top and bottom plates to resist negative loading and provide safe anchor points. ere is also a built in fail-safe device to prevent total mount failure in the case of severe overload. ese are also manufactured from the highest-grade steel to provide high tensile strength without compromising embrittlement. Trelleborg IAVS suspension springs are designed to provide a maintenance free flexible load bearing component allowing angular and shear movement whilst...

Washer Top and bottom washers Overload and rebound washers (top and bottom) are necessary to limit maximum movement in the event of shock loading and to provide fail-safe connections for mobile applications. Type A Steel Washer Type C Rebound Washer with Rubber Type B Top Stepped Steel Washer Trelleborg Industrial AVS operates a policy of continuous improvement and development. We reserve the right to change design and specification of our products without prior notification or alteration of literature. We will not be held responsible for any danger or damage incurred through improper use or...

CHOICE ALL OVER THE WORLD SALES TECHNICAL CENTER PRODUCTION Head Office Trelleborg Industrial AVS 1 Hoods Close, Leicester LE4 2BN, England Tel: +44 116 267 0300 Fax: +44 116 267 0301 [email protected] Branches Trelleborg Industrial AVS Belux (p/a) Trelleborg Wheel Systems Belgium NV Brugsesteenweg 7 BE-9940 Evergem, Belgium Tel: +32 9 258 10 94 Fax: +32 9 253 61 80 [email protected] Trelleborg Industrial AVS Netherlands BV Zeemanstraat 71-73 NL-2991 XR Barendrecht, Holland Tel: +31 10 292 7414 Fax: +31 10 479 7079 [email protected] Trelleborg...