The Trek Model 2100 HF is a high-frequency, high-speed, wide bandwidth amplifier for high power applications. It incorporates an all-solid-state design for highly reliable low-noise operation, thus achieving accurate output response and high slew rates, even in highly capacitive loads. Full power frequency response of the amplifier is essentially flat up to 2 MHz. No overshoot or instability of the waveform occurs due to the amplifier’s unique dual feedback feature. • Output Voltage Range: • Output Current Range: • Slew Rate: • Large Signal Bandwidth (-3 dB): • Small Signal Bandwidth(-3 dB): • DC Voltage Gain: 2 kV/ps, typical DC to greater than 2.6 MHz DC to greater than 3 MHz Typical Applications Include • Dielectric material characterization • Electro-optic modulation • Ion beam control • MEMS • Piezoelectric driving and control • Ultrasonics Features and Benefits • Incorporates all-solid state design for highly reliable low-noise operation • Achieves accurate output rates and high slew rates even in highly capacitive loads • Full power frequency response is essentially flat up to 2 MHz • Dual feed-back feature ensures “no overshoot” or instability of waveform • RoHS compliant • NIST-traceable Certificate of Compliance provided with each unit shipped • compliant TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK 716-438-7555 • 716-201-1804 (fax) • www.trekinc.com •

Performance Output Voltage Range Output Current Range Input Voltage Range Input Impedance DC Voltage Gain Offset Voltage Output Noise Slew Rate (10-90%) Large Signal Bandwidth (-3 dB) 0 to ±150 V DC or peak AC 0 to ±300 mA DC 0 to ±3 V DC or peak AC 50W, nominal 50 V/V Less than ±100 mV Less than 50 mV p-p Greater than 2000 V/pis DC to greater than 2.6 MHz Small Signal DC to greater than 3 MHz Stability Delay Time Less than 6 mV/ minute, noncumulative Drift with Temp Less than 150 ns (input to output) Dimensions Weight HV Connector Electrical Input Power Supplied Accessories Operators’...