1. Catalogs
  2. TREK, INC.
  3. Trek Model 20/20C-HS
video corpo

Trek Model 20/20C-HS

Trek Model 20/20C-HS

Trek Model 20/20C-HS

Product catalog summary
Overview
The Model 20/20C-HS is a high-speed, high-voltage power amplifier designed for industrial and research applications. It features a DC-stable, all-solid-state design that ensures high slew rate, wide bandwidth, and low-noise operation. The amplifier is configured as a non-inverting amplifier and is capable of driving both reactive and resistive loads effectively.
Key Specifications
  • Output Voltage Range: 0 to ±20 kV DC or peak AC
  • Output Current Range: 0 to ±20 mA DC or ±60 mA peak for 1 ms
  • Slew Rate: Greater than 800 V/µs
  • Large Signal Bandwidth: DC to greater than 5.2 kHz
  • DC Voltage Gain: Fixed at 2000 V/V
Features and Benefits
  • Four-quadrant output for driving capacitive loads
  • Closed loop system for high accuracy
  • Short-circuit protection
  • CE compliant (230 VAC unit only)
  • Maintenance-free solid-state design
  • Low output noise for ultra-accurate outputs
Typical Applications
  • Electrostatic deflection
  • Electrophoresis
  • Electrorheological fluids
  • Electro-optic modulation
  • Material poling
  • AC or DC biasing
  • Ion beam steering
  • Particle accelerators
  • Mass spectrometers
  • Material characterization
  • Ferroelectrics
  • Atmospheric plasma
  • Dielectric barrier discharge
Additional Features
  • Dynamic Adjustment: Graduated 1-turn potentiometer for AC response optimization
  • Limit/Trip Mode: Switch selectable with adjustable levels
  • Trip Status Indicator: Illuminates and provides a TTL low signal when tripped
  • Out of Regulation Status: Indicates failure to produce required HV output
Mechanical and Operating Conditions
  • Dimensions: 279 mm H x 482 mm W x 654 mm D
  • Weight: 24.9 kg
  • Operating Temperature: 0°C to 40°C
  • Relative Humidity: Up to 85%, noncondensing
  • Altitude: Up to 2000 meters
Electrical Specifications
  • Line Voltage: 104 to 127 V AC or 180 to 250 V AC
  • Power Consumption: 1000 VA, maximum
Performance
  • Output Voltage Range: 0 to ±20 kV DC or peak AC
  • Output Current Range: 0 to ±20 mA DC or ±60 mA peak for 1 ms
  • Input Voltage Range: 0 to ±10 V DC or peak AC
  • Input Impedance: 25 kΩ, nominal
  • DC Voltage Gain Accuracy: Better than 0.1% of full scale
  • Output Noise: Less than 1.5 V rms
  • Stability: Drift with Time less than 50 ppm/hr, Drift with Temp less than 100 ppm/°C
Monitoring and Control
  • Voltage Monitor: Ratio 1/2000th of the high-voltage output
  • Current Monitor: Ratio 1 V/6 mA
  • High-Voltage On/Off: Local and remote control options
See more

Catalog excerpts

Trek Model 20/20C-HS-1

The Model 20/20C-HS is a DC-stable, high-speed, high-voltage power amplifier used in industrial and research applications. It features an all-solid-state design for high slew rate, wide bandwidth and low-noise operation. The four-quadrant, active output stage sinks or sources current into reactive or resistive loads throughout the output voltage range. This type of output is essential to achieve an accurate output response and high slew rate demanded by a variety of loads such as highly capacitive or reactive loads. It is configured as a non-inverting amplifier. Key Specifications • Output Voltage Range: 0 to ±20 kV DC or peak AC • Output Current Range: 0 to ±20 mA DC or 60 mA peakAC for 1 ms (must not exceed 20 mA rms) • Slew Rate: Greater than 800 V/^s • Large Signal Bandwidth (1% Distortion): DC to greater than 5.2 kHz • DC Voltage Gain: Fixed at 2000 V/V Typical Applications Include • Electrostatic deflection • Electrophoresis • Electrorheological fluids • Electro-optic modulation • Material poling • AC or DC biasing • Ion beam steering • Particle accelerators • Mass spectrometers • Material characterization • Ferroelectrics • Atmospheric plasma • Dielectric barrier discharge Features and Benefits • Four-quadrant output for driving capacitive loads • Closed loop system for high accuracy • Short-circuit protected for equipment protection • CE compliant (230 VAC unit only) • All solid-state design for maintenance free operation • DC-stable for programmable supply applications • Low output noise for ultra-accurate outputs TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK 716-438-7555 • 716-201-1804 (fax) • www.trekinc.com •

 Open the catalog to page 1
Trek Model 20/20C-HS-2

Output Voltage Range Output Current Range Input Voltage Range Input Impedance DC Voltage Gain DC Voltage Gain Accuracy DC Offset Voltage Output Noise 0 to ±20 kV DC or peak AC 0 to ±20 mA DC or ±60 mA peak for 1 ms (must not exceed 20 mA rms) 0 to ±10 V DC or peak AC 25 kW, nominal 2000 V/V Better than 0.1% of full scale Better than ±2 V Less than 1.5 V rms* Slew Rate Greater than 800 V/|js Large Signal Bandwidth (1% distortion) Small Signal Bandwidth (-3dB) Stability Drift with Time Drift with Temp Voltage Monitor Ratio DC Accuracy DC Offset Voltage Output Noise Output Impedance DC to greater...

 Open the catalog to page 2

All TREK, INC. catalogs and technical brochures

  1. PD04002A

    2  Pages

  2. 158A

    2  Pages

  3. 157

    2  Pages

  4. 156A

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.