Catalogs >
TREK, INC. >
Surface/Volume Resistance Probe

Surface/Volume Resistance Probe
2Pages

Catalog excerpts

Trek MODEL 152-1 Resistance Meter Measurement Range 103 to 1013 ohms Probe Electrode Test Voltage User selectable for 10 V or 100 V, ±2%. Test Current Limit Limited to less than 13 mA in the 10 V range and less than 1.7 mA in the 100 V range. MODEL 152P-CR-1 Surface / Volume Resistance Probe A three (3) position switch on the probe selects performance options. Optional Test Plate Set These plates provide additional ESD STM standard options for guarded and unguarded resistance and volume measurements. Optional Probe Calibration Fixture Provides measurement accuracy verification of resistance/resistivity probes. Trek Model 152P-CR-1 Surface/Volume Concentric Ring Probe The Trek Model 152P-CR-1 Concentric Ring Probe is capable of measuring surface and volume resistance in materials as per IEC or ESDA standards. A three (3) position switch on the probe selects surface resistance or volume resistance measurements with either a guarded or unguarded outer electrode. (See page 2.) An optional Test Plate Set [CN 17530] consists of two separate plates. A stainless steel conductive plate can act as a second electrode to apply the test voltage to the sample under test and also provides a mini-banana plug connection for a secure ground connection. An insulative plate is utilized as needed. The use of these plates are described in the ESD STM11.12 and in IEC 613402-3 standards. The Trek Model 152-1 Resistance Meter used with the 152P-CR-1 system, is designed to precisely measure surface resistance on a wide variety of conductive, dissipative, and insulative materials. The Model 152-1 Resistance Meter employs a measurement technique which conforms to ANSI/ESD Association standards for measuring surface resistance, resistivity, and volume resistance and features exceptional measurement accuracy and wide measurement ranges of 103 to 1013 ohms using either a point-to-point probe or the two-point probe. Measured resistance values are clearly displayed on a high-contrast LCD display. Various probes are available and accessory options include a Walking Test Adapter which allows analysis of resistance levels on the human body [STM 97.1].

Open the catalog to page 1

Model 152-CR-1 Concentric Ring Probe and Test Plate Set The Trek Model 152P-CR-1 Concentric Ring Probe, when used with the Trek Model 152-1 Resistance Meter, is capable of measuring surface and volume resistance in materials as per IEC or ESDA standards. A three (3) position switch on the probe selects for SURFACE resistance measurements or VOLUME resistance measurements either with a GUARDED or UNGUARDED outer electrode. In addition to the Model 152P-CR-1 Concentric Ring Probe [CN 17529], Trek offers a Test Plate Set [CN 17530] that consist of two separate plates, each approximately 5...

Open the catalog to page 2

Surface/Volume Resistance Probe 2Pages

Catalog excerpts

All TREK catalogs and technical brochures

Surface/Volume Resistance Probe
2Pages