1. Catalogs
  2. TREK, INC.
  3. 40/15 High-Voltage Power Amplifier
video corpo

40/15 High-Voltage Power Amplifier

40/15 High-Voltage Power Amplifier

40/15 High-Voltage Power Amplifier

Product catalog summary
Overview: The Model 40/15 is a DC-stable, high-voltage power amplifier designed for high slew rate, wide bandwidth, and low-noise operation. It features an all solid-state design and is configured as noninverting with a fixed gain of 4000 V/V. The amplifier is protected against overvoltage and overcurrent conditions and includes precision voltage and current monitors for feedback in closed-loop systems.
Key Specifications:
  • Output Voltage Range: 0 to ±40 kV DC or peak AC
  • Output Current Range: 0 to ±15 mA DC or peak AC
  • Slew Rate: Greater than 350 V/µs
  • Large Signal Bandwidth: DC to greater than 1.4 kHz (2% Distortion)
  • DC Voltage Gain: Fixed at 4000 V/V
Applications: The amplifier is suitable for dielectric studies, electron beam ion traps, electrospinning, electrostatic deflection, flame control, levitation, precipitation, high-voltage cable and component testing, and plasma studies.
Features and Benefits:
  • Four-quadrant output for capacitive loads
  • Closed-loop system for high accuracy
  • Short-circuit protection
  • All solid-state design for maintenance-free operation
  • Low output noise for ultra-accurate outputs
  • NIST-traceable Certificate of Calibration
Control and Indicators:
  • High-Voltage On/Off: Local push-button and remote TTL input
  • Dynamic Adjustment: 1-turn panel potentiometer for AC response optimization
  • Current Limit/Trip: Adjustable from 0 to ±15 mA
  • Status Indicators: Out of Regulation and Limit/Trip indicators with TTL outputs
Mechanical and Environmental:
  • Dimensions: 1239 mm H x 578 mm W x 893 mm D
  • Weight: 100 kg
  • Operating Temperature: 0°C to 40°C
  • Relative Humidity: Up to 75%, noncondensing
  • Altitude: Up to 1524 meters
Electrical:
  • Line Voltage: 180 to 250 V AC at 48 to 63 Hz
  • Power Consumption: 1800 VA, maximum
Performance:
  • DC Voltage Gain Accuracy: Better than 0.1% of full scale
  • Offset Voltage: Less than ±4 V
  • Output Noise: Less than 5 V rms
  • Stability: Drift with Time less than 50 ppm/hr, Drift with Temperature less than 100 ppm/°C
Monitors:
  • Voltage Monitor: Ratio 1 V / 4000 V, DC Accuracy better than 0.1%
  • Current Monitor: Ratio 0.5 V/mA, DC Accuracy better than 2%
See more

Catalog excerpts

40/15 High-Voltage Power Amplifier-1

TTek Model 40/15 High-Voltage Power Amplifier The Model 40/15 is a DC-stable, high-voltage power amplifier featuring an all solid-state design for high slew rate, wide bandwidth, and low-noise operation. It is configured as noninverting with a fixed gain of 4000 V/V and is protected against overvoltage and overcurrent conditions that may be generated by active loads or by output short circuits to ground. Precision voltage and current monitors provide low-voltage representations of the high-voltage output and load current for monitoring purposes or for use as feedback signals in a closed-loop system. The 4-quadrant, active output stage sinks or sources current to reactive or resistive loads throughout the output voltage range. This is essential to achieve the accurate output response and high slew rates demanded by reactive loads. • Output Voltage Range: • Output Current Range: • Slew Rate: • Large Signal Bandwidth: (2% Distortion) • DC Voltage Gain: Features and Benefits • Four-quadrant output for driving capacitive loads • Closed loop system for high accuracy • Short-circuit protected for equipment protection • All solid-state design for maintenance free operation • DC-stable for programmable supply applications • Low output noise for ultra-accurate outputs • NIST-traceable Certificate of Calibration provided with each unit • C £ compliant TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK 716-438-7555 • 716-201-1804 (fax) • www.trekinc.com •

 Open the catalog to page 1
40/15 High-Voltage Power Amplifier-2

Performance Output Voltage 0 to ±40 kV DC or peak AC Range Output Current 0 to ±15 mA DC or peak AC Range Input Voltage Range 0 to ±10 V DC or peak AC Input Impedance 25 kW, nominal (inverting/differential option DC Voltage Gain DC Voltage Gain Accuracy Offset Voltage Output Noise 4000 V/V Better than 0.1% of full scale Less than ±4 V Less than 5 V rms* DC Accuracy DC Offset Voltage Output Noise Output Impedance Current Monitor Ratio DC Accuracy Offset Voltage Better than 0.1% of full scale Less than ±2 mV Less than 20 mV rms* 47 W 0.5 V/mA Better than 2% of full scale Less than ±10...

 Open the catalog to page 2

All TREK, INC. catalogs and technical brochures

  1. PD04002A

    2  Pages

  2. 158A

    2  Pages

  3. 157

    2  Pages

  4. 156A

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.