Trek’s Model 2210 is one of several models within our 2200-series of high-voltage 40 W amplifiers. Provided at an attractive price and offering high performance, the unit incorporates DC stability, wide bandwidth and well regulated/controlled AC output signals. It also features full four-quadrant class AB all-solid-state output stages, DC offset adjustment with front panel metering, and autorecovery shutdown to protect the output from being overpowered. The instrument sinks or sources current into reactive or resistive loads throughout the output voltage range making it ideal to achieve the accurate output response and high slew rates demanded by reactive loads. Key Specifications . Output Voltage Range: . Output Current Range: . Slew Rate: . Large Signal Bandwidth (-3 dB): . Small Signal Bandwidth(-3 dB): . DC Voltage Gain: 0 to ±1 kV DC or peak AC 0 to ±20 mA DC or ±40 mA peak AC for 5 ms minimum 150 V/ps, typical DC to greater than 40 kHz DC to greater than 100 kHz 100 V/V Typical Applications Include • Piezoelectric driving/control * Electro-optic • MEMS ^ • Many areas of research > Four-quadrant output for driving capacitive loads 2-year warranty DC offset adjustment with front panel metering Auto-recovery shutdown protects the output from being overpowered Low output noise for ultra-accurate outputs All solid-state output stages RoHS compliant HALT Tested NIST-traceable Certificate of Calibration provided with each unit tC compliant TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK 716-438-7555 • 716-201-1804 (fax) • www.trekinc.com • [email protected]

Model 221O Specifications Performance Output Voltage Range Output Current Range Input Voltage Range Input Impedance DC Voltage Gain DC Voltage Gain Accuracy DC Offset Voltage Output Noise Slew Rate (10% to 90%, typical) Large Signal Bandwidth (-3 dB) Small Signal Bandwidth (-3dB) Settling Time to 1% Internal Capacitance (HV Output) Automatic Power Limit Stability Drift with Time Drift with Temp Voltage Monitor Ratio Noise 0 to ±1 kV DC or peak AC 0 to ±20 mA DC or ±40 mA peak for 5 ms minimum 0 to ±10 V DC or peak AC 10 kW, nominal 100 V/V Better than 0.5% of full scale Less than 1 V Less than...