1. Catalogs
  2. TREK, INC.
  3. 20/20C High-Voltage Power Amplifier
video corpo

20/20C High-Voltage Power Amplifier

20/20C High-Voltage Power Amplifier

20/20C High-Voltage Power Amplifier

Product catalog summary
Overview: The Model 20/20C is a DC-stable, high-voltage power amplifier designed for industrial and research applications. It features an all-solid-state design, providing high slew rate, wide bandwidth, and low-noise operation. The amplifier is configured as a non-inverting amplifier and includes a four-quadrant active output stage for driving reactive or resistive loads.
Key Specifications:
  • Output Voltage Range: 0 to ±20 kV DC or peak AC
  • Output Current Range: 0 to ±20 mA DC or peak AC
  • Slew Rate: Greater than 450 V/µs
  • Large Signal Bandwidth (-3 dB): DC to greater than 7.5 kHz
  • DC Voltage Gain: Fixed at 2000 V/V
Features and Benefits:
  • Four-quadrant output for capacitive loads
  • Closed loop system for high accuracy
  • Short-circuit protection
  • CE compliant (230 VAC unit only)
  • Maintenance-free solid-state design
  • Low output noise for ultra-accurate outputs
Typical Applications:
  • Electrostatic deflection
  • Electrophoresis
  • Electrorheological fluids
  • Electro-optic modulation
  • Material poling
  • AC or DC biasing
  • Ion beam steering
  • Particle accelerators
  • Mass spectrometers
  • Material characterization
  • Ferroelectrics
  • Atmospheric plasma
  • Dielectric barrier discharge
Additional Features:
  • Dynamic Adjustment: Graduated 1-turn panel potentiometer for AC response optimization
  • Current Limit/Trip: Switch selectable with adjustable limit or trip level
  • Out of Regulation Status: Indicator and TTL low signal for HV output issues
  • Trip Status: Indicator and TTL low signal for current trip level exceedance
  • Fault Status: BNC provides TTL low when out of regulation for over 500 ms
Mechanical Specifications:
  • Dimensions: 279 mm H x 482 mm W x 654 mm D (11” H x 19” W x 25.75” D)
  • Weight: 24.9 kg (55 lb)
  • HV Connector: Caton High Voltage Connector
  • BNC Connectors: Various monitoring and control functions
Operating Conditions:
  • Temperature: 0°C to 40°C (32°F to 104°F)
  • Relative Humidity: Up to 85%, noncondensing
  • Altitude: Up to 2000 meters (6561.68 ft.)
Electrical Specifications:
  • Line Voltage: Factory set for 104 to 127 V AC or 180 to 250 V AC, 48 to 63 Hz
  • Power Consumption: 1000 VA, maximum
Supplied Accessories:
  • Operators’ Manual
  • HV Output Cable
  • Line Cord, Spare Fuses
Optional Accessories:
  • 19” Rack Mount Kit with EIA or JIS hole spacing
Performance Specifications:
  • Output Voltage Range: 0 to ±20 kV DC or peak AC
  • Output Current Range: 0 to ±20 mA DC or peak AC
  • Input Voltage Range: 0 to ±10 V DC or peak AC
  • Input Impedance: 25 kΩ, nominal
  • DC Voltage Gain Accuracy: Better than 0.1% of full scale
  • Output Noise: Less than 1.5 V rms*
  • Stability: Drift with Time less than 50 ppm/hr, Drift with Temp less than 100 ppm/°C
Voltage and Current Monitoring:
  • Voltage Monitor Ratio: 1/2000th of the high-voltage output
  • Current Monitor Ratio: 0.5 V/mA
  • Output Noise: Voltage Monitor less than 10 mV rms*, Current Monitor less than 30 mV rms*
High-Voltage On/Off Control:
  • Local: Individual push-button switch
  • Remote: TTL compatible input for high-voltage control
See more

Catalog excerpts

20/20C High-Voltage Power Amplifier-1

The Model 20/20C is a DC-stable, high-voltage power amplifier used in industrial and research applications. It features an all-solid-state design for high slew rate, wide bandwidth and low-noise operation. The four-quadrant, active output stage sinks or sources current into reactive or resistive loads throughout the output voltage range. This type of output is essential to achieve an accurate output response and high slew rate demanded by a variety of loads such as highly capacitive or reactive loads. It is configured as a non-inverting amplifier. 0 to ±20 kV DC or peak AC 0 to ±20 mA DC or peak AC Greater than 450 V/^s DC to greater than 7.5 kHz Fixed at 2000 V/V • Output Voltage Range: • Output Current Range: • Slew Rate: • Large Signal Bandwidth (-3 dB): • DC Voltage Gain: Typical Applications Include • Electrostatic deflection • Electrophoresis • Electrorheological fluids • Electro-optic modulation • Material poling • AC or DC biasing • Ion beam steering • Particle accelerators • Mass spectrometers • Material characterization • Ferroelectrics • Atmospheric plasma • Dielectric barrier discharge Features and Benefits • Four-quadrant output for driving capacitive loads • Closed loop system for high accuracy • Short-circuit protected for equipment protection • CE compliant (230 VAC unit only) • All solid-state design for maintenance free operation • DC-stable for programmable supply applications • Low output noise for ultra-accurate outputs TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK 716-438-7555 • 716-201-1804 (fax) • www.trekinc.com •

 Open the catalog to page 1
20/20C High-Voltage Power Amplifier-2

Model 20/20C Specifications Performance Output Voltage Range 0 to ±20 kV DC or peak AC Output Current Range Input Voltage Range Input Impedance DC Voltage Gain DC Voltage Gain Accuracy DC Offset Voltage Output Noise Slew Rate (10% to 90%, typical) Large Signal Bandwidth (-3 dB) Large Signal Bandwidth (1% distortion) Small Signal Bandwidth (-3dB) Stability Drift with Time Drift with Temp 0 to ±20 mA DC or peak AC 0 to ±10 V DC or peak AC 25 kW, nominal 2000 V/V Better than 0.1% of full scale Less than ±2 V Less than 1.5 V rms* Greater than 450 V/|js DC to greater than 7.5 kHz DC to greater...

 Open the catalog to page 2

All TREK, INC. catalogs and technical brochures

  1. PD04002A

    2  Pages

  2. 158A

    2  Pages

  3. 157

    2  Pages

  4. 156A

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.