Catalogs >
TREK, INC. >
152P-2P Two-Point Resistance Probe

152P-2P Two-Point Resistance Probe
2Pages

Catalog excerpts

Model 152P-2P Two Point Resistance Probe ! Performs measurements on areas too small to measure with other standard probes ! ! Exceptional accuracy, ! Wide measurement The Trek Model 152P-2P probe is used to perform accurate two point resistance measurements in the range of 103 to 1013 ohms. The Model 152P-2P probe is designed to perform resistance measurements on objects too small to be measured using the concentric ring probe specified in ANSI/ESD Association standard STM11.11, or too small to be measured using the point-to-point probes specified in other ANSI/ESD Association standards. Items such as thermo-formed trays, tape and reel carriers, and similar objects can now be accurately measured for their resistance characteristics. The Model 152P-2P probe housing is made from a dissipative, lowsloughing material for optimum performance in ESD areas. Additional features include Elastomer electrodes, which provide excellent surface contact, a compact probe design which is lightweight and portable, and probe electrode pins which can be removed for easy replacement. A removable probe cap permits tests to be quickly performed using a precise 90° angle on flat surfaces. With the probe cap removed, the two independent probe electrodes can be placed in extremely small or recessed spaces. Independent spring action of each probe electrode allows measurements of uneven surfaces. The Model 152P-2P operates with the Trek Model 152 Surface Resistance Meter and most other brands of resistance meters with banana plug inputs. ! Elastomer electrodes for excellent surface contact ! probe design ! ! Operates with most resistance meters including the Trek Model 152 ! ! Independent spring probe action for uneven surfaces ! rapid, 90° right angle measurements Measurement and Power SolutionsTM www.trekinc.com

Open the catalog to page 1

Probe Dimensions 6.4” length x 0.75” diameter (163 mm x 19 mm). Cable Length 6 ft (1829 mm). Probe Contacts 0.125” (3.2 mm) diameter conductive silicon elastomer. Distance Between Probe Contacts (center to center) 0.25” (6.4 mm). Contact Travel 0.170 ” (4.3 mm). Contact Force 16 oz ( 454 g), nominal at 0.170” (4.3 mm) contact in-travel. CERTIFICATION TREK, INC. certifies that each Model 152P-2P probe is tested and calibrated to specifications using measurement equipment traceable to the National Institute of Standards and Technology or traceable to consensus standards. 10 to 10 ohms...

Open the catalog to page 2

152P-2P Two-Point Resistance Probe 2Pages

Catalog excerpts

All TREK catalogs and technical brochures

152P-2P Two-Point Resistance Probe
2Pages