The Trek Model 10/10B-HS is a DC stable high-speed high-voltage power amplifier capable of precise control of output voltages. It features an all-solid-state design for high slew rate, wide bandwidth and low-noise operation. The four-quadrant, active output stage sinks or sources current into reactive or resistive loads throughout the output voltage range. This is essential for monitoring the accurate output response and high slew rates when driving reactive loads. Key Specifications • Output Voltage Range: • Output Current Range: • Slew Rate: • Large Signal Bandwidth (-3 dB): • DC Voltage Gain: 0 to ±10 kV DC or peak AC 0 to ±10 mA DC or 40 mA peak AC for 1 ms Greater than 700 V/ps DC to greater than 19.5 kHz Fixed at 1000 V/V Typical Applications Include AC or DC biasing Atmospheric plasma Dielectric barrier discharge Electroactive polymers (EAP) Electrophoresis, electrophotography Electrorheological fluids Electrostatic deflection Electro-optic modulation Ferroelectric material characterization Ion beam steering Mass spectrometers Electrophoresis, electrophotography Electrorheological fluids Material poling and particle accelerators Features and Benefits Four-quadrant output for driving capacitive loads Closed loop system for high accuracy Short-circuit protected for equipment protection All solid-state design for maintenance free operation DC-stable for programmable supply applications Low output noise for ultra-accurate outputs NIST-traceable Certificate of Calibration provided with each unit compliant TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK 716-438-7555 • 716-201-1804 (fax) • www.trekinc.com • [email protected]

Performance Output Voltage Range Output Current Range Input Voltage Range Input Impedance DC Voltage Gain DC Voltage Gain Accuracy DC Offset Voltage Output Noise Slew Rate (10% to 90%, typical) Small Signal Bandwidth (-3dB) Large Signal Bandwidth (-3 dB) Large Signal Bandwidth (1% distortion) Stability Drift with Time Drift with Temperature Voltage Monitor Ratio DC Accuracy DC Offset Voltage Output Noise Output Impedance Current Monitor Ratio DC Accuracy Offset Voltage Output Noise Bandwidth (-3dB) 0 to ±10 kV DC or peak AC 0 to ±10 mA DC or ±40 mA peak for 1 ms 0 to ±10 V DC or peak AC 20 kW,...