TOUGH GUN TT3 and TT3E Reamer Spec Sheet
8Pages

Issued July 2016 • Index No. TT3/1.1 Robotic MIG (GMAW) Welding Peripheral Nozzle Cleaning Station Quick Specs Automotive Fabrication Manufacturing *Base unit only. Optional features may change weight and dimensions The TOUGH GUN™ TT3 Reamer is TOUGH on spatter and operates reliably in even the harshest welding environments. Automating spatter removal will help to extend the life of your robotic MIG guns and consumables, benefitting your bottom line, production uptime and throughput. TOUGH GUN Wire Cutter cuts a variety of wire types, including stainless steel, aluminum and flux-core, in sizes up to 1/16" (optional) NEW!! The TOUGH GUN TT3E Reamer robotic nozzle cleaning station offers the same high levels of durability, serviceability and repeatability now further enhanced by digital Ethernet communications that better integrate this unit into the digital controls infrastructure of your facility. 4-sided v-block eliminates the need to purchase new v-blocks when changing nozzle styles Enjoy greater control optimization, remote monitoring capability, and faster troubleshooting of all discrete TOUGH GUN Reamer I/O functions to facilitate increased productivity in your robotic welding applications. NEW! Configuration option for the TOUGH GUN TT3 Reamer Ethernet module is a multiprotocol communication adapter which enables remote capabilities (optional) Extend life of consumables and increase production uptime Extended warranty when configured with a dedicated motor lubricator and used exclusively with TOUGH GARD™ Anti-Spatter Liquid DURABILITY 3/4 HP air motor with gear reducer provides the high torque required for spatter removal at the low speeds needed to protect spindle and cutter blade from excessive wear New cutter blades are engineered from harder, stronger material, making them more resistant to breaking, chipping or cracking External setup switches allow independent operation of the sprayer, clamp and spindle during manual setup No damage will occur to the air motor if stalling occurs Sprayer reservoir is located on the opposite side of the unit as an additional safeguard against overfilling / leakage onto internal electronics Operates in any position Dedicated Motor Lubricator improves longevity of the motor (optional) Spindle with rotating rod accuracy of 0.001” - 0.004” at extended position for cutting repeatability and optimized spatter removal Fixed motor, clamp and v-block provide cutting accuracy and repeatability. No manual adjustments to nozzle clamps, cutter height, or motor height are required 2570 North Talbot Road Windsor, Ontario N0R 1L0 Canada Quick change base plate Phone: 1-855-MIGWELD (644-9353) (US & Canada) +1-519-737-3000 (International) Fax: 519-737-1530 For more information, visit us at Tre

Specifications subject to change without notice) ( Rated Voltage Operating Voltage Power Consumption ±10% of Max. wattage in rated voltage operation 5.3 W Product Dimensions Stall torque at 80 PSI (5.5 bar) = 83 in.-lbs. (9.4 Nm) *The optional features (sold separately or selected as options when ordering) can change the weight and physical dimensions of the product. TOUGH GUN TT3A Reamer (Anal

TOUGH GUN TT3E Reamer (Ethernet)

Recommended for use with TOUGH GARD™Anti-Spatter Liquid (page 7) TS-500-40 Sprayer Quick Connect SR-500-40 Bracket - Electronic Valve ER-2554 90 Degree 1/4" Port, 1/4" NPT Elbow SR-500-10 Extruded 90 Degree Street Elbow 412-3 Control Wire Sheath Cutter Blades For Standard Duty or Heavy Duty Consumables RC-13 3/4" Bore (600 amp Robotic Water-Cooled) For TOUGH ACCESS™ Consumables RCT-18 15.5 mm Nozzle M10 Tip WH500T Torch, Binzel Panasonic® is a trademark of Panasonic Welding Systems Co. Ltd Binzel® is the registered trademark of Alexander Binzei Schweisstechnik GmbH & Co. KG, Germany V-Block...

Cutter Blade and V-Block Chart Nozzle Part # Reamer Model V-Block Part # Cutter Blade Part # #

Additional Options Wire Cutter The TOUGH GUN™ Wire Cutter from Tregaskiss removes the ball at the end of the welding wire to provide smooth arc starts and consistent wire stick-out. This system cuts a variety of wire types, including stainless steel, aluminum and flux-core, in sizes up to 1/16" (1.6 mm) The Filter/Regulator unit from Tregaskiss is another recommended accessory that helps extend the life of your TOUGH GUN™ TT3 Reamer. WC-100 TOUGH GUN Wire Cutter (Analog) WC-100E TOUGH GUN Wire Cutter (Ethernet) The Filter cleans the air supply to the reamer and restricts debris from...

Accessories TOUGH GARD™ Multi-Feed System Eliminate the need to frequently refill sprayer reservoirs with the TOUGH GARD Multi-Feed System from Tregaskiss. Feed up to 10 TOUGH GUN Reamer units from a single 5-gallon or 55-gallon drum of TOUGH GARD Anti-Spatter Liquid. • • • • All TOUGH GUN TT3 Reamer units are multi-feed ready by removing the sprayer reservoir. A fluid-level indicator displays when pail or drum requires refilling. Quick-connects allow fast and easy connection to nozzle cleaners. Increased safety — eliminates the need for operators to enter robotic cells if pails or drums...

Ordering Information Model TT3 Cutter Blade 01 5/8” Bore Standard or HD Consumables Sprayer (Standard) 04 1/2” Bore Standard or HD Consumables W Sprayer + Wire Cutter (WC) 05 1/2” Bore TOUGH ACCESS™ Consumables Sprayer + Nozzle Detect* * 10 5/8” Bore TOUGH ACCESS Consumables Sprayer + Nozzle Detect**+ WC 11 11/16” Bore (For Tandem Consumables) Robotic Water-Cooled Consumables * Not capable with Nozzle Detect option ** Internal nozzle detect not available for Ethernet models; only supports 1.062" Outside Diameter (O.D.) nozzles ***Air Blast configurations available only for Ethernet models...