TOUGH GUN™ TT3 Reamer
8Pages

Issued July 2019 • Index No. TT3/1.4 Robotic MIG (GMAW) Welding Peripheral Nozzle Cleaning Station Quick Specs Applications Automotive Fabrication Manufacturing *Base unit only. Optional features may change weight and dimensions TOUGH GUN Wire Cutter cuts a variety of wire types, including stainless steel, aluminum and flux-core, in sizes up to 1/16" (optional) The TOUGH GUN™ TT3 Reamer is TOUGH on spatter and operates reliably in the harshest welding environments. Automating spatter removal and anti-spatter liquid application will help to extend the life of your robotic MIG guns and consumables, benefitting your bottom line, production uptime and throughput. 4-sided v-block eliminates the need to purchase new v-blocks when changing nozzle styles NEW!! The TOUGH GUN TT3E Reamer robotic nozzle cleaning station offers the same high levels of durability, serviceability and repeatability now further enhanced by digital Ethernet communications that better integrate this unit into the digital controls infrastructure of your facility. New cutter blades are engineered from harder, stronger material, making them more resistant to breaking, chipping or cracking Enjoy greater control optimization, remote monitoring capability, and faster troubleshooting of all discrete I/O functions to facilitate increased productivity in your robotic welding applications. NEW! Configuration option for the TOUGH GUN TT3 Reamer Rated Input/Output External setup switches allow independent operation of the sprayer, clamp and spindle during manual setup Extend life of consumables and increase production uptime Sprayer reservoir is located on the opposite side of the unit as an additional safeguard against overfilling / leakage onto internal electronics Extended warranty when configured with a dedicated motor lubricator and used exclusively with TOUGH GARD™ Anti-Spatter Liquid DURABILITY • 3/4 HP air motor with gear reducer provides the high torque required for spatter removal at the low speeds needed to protect the spindle and cutter blade from excessive wear • No damage will occur to the air motor if stalling occurs • Operates in any position Dedicated Motor Lubricator improves longevity of the motor (optional) REPEATABILITY • Spindle with rotating rod accuracy of 0.001” - 0.004” at extended position for cutting repeatability and optimized spatter removal • Fixed motor, clamp and v-block provide cutting accuracy and repeatability - No manual adjustments to nozzle clamps, cutter height, or motor height are required 2570 North Talbot Road Windsor, Ontario N0R 1L0 Canada Quick change base plate Phone: 1-855-MIGWELD (644-9353) (US & Canada) +1-519-737-3000 (International) Fax: 519-737-1530 For more information, visit

Specifications (subject to change without notice) *The optional features (sold separately or selected as options when ordering) can change the weight and physical dimensions of the product. TOUGH GUN TT3 Reamer (Analog) Reamer Clamp Cover Reamer Clamp Jaw^ -Clamp Cylinder Clamp Limit Switch Valve Pack- Sprayer Reservoir Electronic Sprayer Check Valve- (Setup Switch Plate Limit Switch Push Button Rear Cover Check Valve Bracket - Cutter Blade- '-Front Spindle Shroud Cover Circuit Board Reamer Drive Belt Detect (optional) -Lubricator (optional)

Push button Switches Reamer Clamp Cover (Front View) Ethernet Module lamp Cylinder Sprayer Reservoi /^Clamp Limit Rear Cover Electronic Sprayer Check Valve- Spindle Limit Switch Check Valve Front Spindle Shroud Cove Ethernet Cable Receptacles Comm Plate Nozzle Detect

Electrical 24 volts DC 2.5 watts Pneumatic 80-100 psi at 16 CFM Recommended for use with TOUGH GARD™ Anti-Spatter Liquid (page 7) TOUGH GUN Sprayer Kit Sprayer Steel Line Kit Reservoir Sprayer Quick Connect 1/4" Sprayer Hose Sprayer Check Valve Spray Block with Fittings 1/4" Tubing, 90° Elbow, Uni-fit Thread Extruded 90 Degree Street Elbow Sprayer Bracket Cutter Blades For Standard Duty or Heavy Duty Consumables RCT-13 3/4" Bore (600 amp Robotic Water-Cooled) For TOUGH ACCESS™ Consumables RCT-18 15.5 mm Nozzle M10 Tip WH500T Torch, Binzel Panasonic® is a trademark of Panasonic Welding...

*Placeholder for communication type; "A" for analog model; "E" for Ethernet model

Wire Cutter The TOUGH GUN™ Wire Cutter from Tregaskiss removes the ball at the end of the welding wire to provide smooth arc starts and consistent wire stick-out. This system cuts a variety of wire types, including stainless steel, aluminum and flux-core, in sizes up to 1/16" (1.6 mm). WC-100 TOUGH GUN Wire Cutter (Analog) WC-100E TOUGH GUN Wire Cutter (Ethernet) The Filter/Regulator unit from Tregaskiss is another recommended accessory that helps extend the life of your TOUGH GUN™ TT3 Reamer. The Filter cleans the air supply to the reamer and restricts debris from reaching the motor,...

TOUGH GARD™ Multi-Feed System Eliminate the need to frequently refill sprayer reservoirs with the TOUGH GARD Multi-Feed System from Tregaskiss. Feed up to 10 TOUGH GUN Reamer units from a single 5-gallon or 55-gallon drum of TOUGH GARD Anti-Spatter Liquid. • All TOUGH GUN TT3 Reamer units are multi-feed ready by removing the sprayer reservoir. • Can be gravity fed by elevating the position of TOUGH GARD Liquid source. • Does not require a pump.x • A fluid-level indicator displays when pail or drum requires refilling. • Quick-connects allow fast and easy connection to nozzle cleaners. •...

*Air Blast option only available for Ethernet models Subject to Change - The information presented in this spec sheet is accurate to the best of our knowledge at the time of printing. Please visit Tregaskiss.com for the most up-to-date information.