AccuLock™ R Series Consumables
4Pages

AccuLock R Series Consumables ™ Quick Specs Applications Automotive Fabrication Manufacturing Series Components Compatible With Issued October 2019 • Index No. ALR/1.1 MIG (GMAW) Welding Consumables TOUGH GUN® Robotic Air-Cooled Guns TOUGH GUN® Fixed Automatic Air-Cooled Guns Nozzles Gas Diffusers Contact Tips QUICK LOAD® Liners Wire Size In robotic MIG welding applications, MIG gun consumables require frequent replacement, contributing to both planned and unplanned downtime. If you need to increase throughput and efficiency with minimal risk and effort, it's time to take a fresh look at your MIG gun consumables. Load and Lock to Reduce Unplanned Downtime Challenged by a shortage of experienced welding operators? The longer lifespan of AccuLock Contact Tips means fewer human interactions within your welding cells and fewer accidental errors as a result. Plus, with tip cross-threading issues virtually eliminated from your list of failure modes, you'll spend less time troubleshooting and more time on proactive weld quality and productivity iniatives. Load and Lock to Reduce Planned Downtime Achieve your annual cost reduction and throughput goals by decreasing planned downtime for consumables replacement. AccuLock R Consumables offer an enhanced contact tip-to-diffuser design which increases tip life over comparable consumables, reducing your replacement frequency. Upgrading from a copper tip to AccuLock HDP Contact Tips can increase life by an additional 10x or more depending on your application. In most cases, your current tip and diffuser can be replaced with no impact to TCP, making this upgrade low effort, low risk and high payoff. Long tail ensures tip concentricity Coarse thread speeds tip replacement and prevents cross-threading More mass at the front of the contact tip to better withstand heat AccuLockTM Contact Tips last longer and are quicker and easier to install Tapered connections provide excellent electrical conductivity 60%+ of contact tip is buried in the diffuser, away from the heat 2570 North Talbot Road Windsor, Ontario N0R 1L0 Canada AccuLockTM Contact Tips can be used on robotic and semi-automatic MIG guns Phone: 1-855-MIGWELD (644-9353) (US & Canada) +1-519-737-3000 (International) Fax: 519-737-1530 For more information, visit us at Tregaskiss

AccuLock R Series (Slip-On) —ll nil 401-XX-62 All Tapered, Slip-On 5/8” Bore Nozzles 401-XX-62 All Bottleneck, Slip-On 5/8” Bore Nozzles *For all Tregaskiss® robotic and automatic air-cooled MIG guns AccuLock R Series (Thread-On) 401-XX-62 All Tapered, Thread-On 5/8” Bore Nozzles 401-XX-62 All Bottleneck, Thread-On 5/8” Bore Nozzles T-AXXXWH AccuLock HDP Contact Tip *For all Tregaskiss® robotic and automatic air-cooled MIG guns

Heavy Duty (HD) Diffusers Part Number Description Qty Part Number Description Qty Tregaskiss® Nozzles Air-Cooled Nozzles (Thread-On) Part Number Air-Cooled Nozzles (Slip-On) Part Number AccuLock™ Contact Tips NOTE: Add '-100' to the end of any AccuLock Contact Tip part number listed for quantities of 100. Heavy Duty (HD) Copper Contact Tips Part Number Description Heavy Duty (HD) Chrome Zirconium Contact Tips Part Number Description Qty Part Number Description Qty Engineered with a special alloy that has superior resistance to arc erosion and wear, HDP tips last 6-10X longer than copper and...

Select your wire size and gun length in the table below to find which QUICK LOAD Liner part number is needed for your application. Compatible with Tregaskiss TOUGH GUN Robotic and Automatic MIG Guns and Bernard BTB, TGX and Clean Air Semi-Automatic MIG Guns **Compatible with most Tweco® MIG Guns Tregaskiss® AccuLock™ R (Robotic) Series Consumables and Bernard® AccuLock S (Semi-Auto) Series Consumables share a common contact tip. If you have a combination of robotic and semiautomatic guns in your facility, you'll benefit from the reduced costs and simplified inventory of a Common Consumable...