- Catalogs
- TreedFilaments
- Stiron HIPS
Stiron HIPS
Stiron HIPS
- Extruder Temperature: 220° +/-10° Celsius
- Bed Temperature: 85° +/-10° Celsius
- Print Speed: 60-90 mm/s
- Fan Speed: 0-30%
- Minimum Nozzle Diameter: 0.3 mm
- Density: 1.04 g/cm3 (ISO 1183)
- Water Absorption: 0.1% (ISO 62)
- Tensile Modulus: 1800 MPa (ISO 527)
- Tensile Strain (Yield): 1.5% (ISO 527)
- Charpy Impact at 23°C: 12 kJ/m2 (ISO 179)
- MFR: 4 g/10 min (ISO 62)
- Melting Point: 240°C (ISO 11357)
- Vicat Softening Temperature: 96°C (ISO 306)
- Material: Stiron HIPS
The information provided is compiled from reliable sources and is accurate to the best of our knowledge. However, due to potential changes in data, safety standards, and regulations, Sa2p/Treed Filaments does not guarantee the completeness or accuracy of the information and disclaims liability for reliance on it. Users should ensure they have the most current data for their specific use.
Catalog excerpts
TREED FILAMENT DATASHEET MATERIAL: Stiron HIPS WE CARE ABOUT YOUR PRINTS DISCLAIMER The Information presented herein has been compiled from sources considered to be dependable and is accurate to the best of our knowledge. However, since data, safety standards, and government regulations are subject to change and the conditions of handling and use, or misuse, are beyond our control, Sa2p/Treed Filaments makes no warranty expressed or implied, with respect to completeness or continuing accuracy of the information contained herein and disclaims all liability for reliance thereon. User should satisfy himself that he has all current data relevant to his particular use.
Open the catalog to page 1All TreedFilaments catalogs and technical brochures
ABS ESD2 Pages
PAKK2 Pages
Ultraflexx, Ultraflexx+1 Page
Gonzales High Speed PLA1 Page
MATERIAL: Fusion PLA1 Page
MATERIAL: Ecogenius PLA1 Page
