- Catalogs
- TreedFilaments
- MATERIAL: Shogun Heat Resistant PLA
MATERIAL: Shogun Heat Resistant PLA
MATERIAL: Shogun Heat Resistant PLA
- Extruder Temperature: 195° +/-10° Celsius
- Bed Temperature: Cold to 90° Celsius
- Print Speed: 60-70 mm/s
- Fan Speed: 0-20%
- Minimum Nozzle Diameter: 0.3 mm
- Density: 1.3 g/cm3 (ASTM D792)
- IZOD Impact Strength Notched at 23°C: 50 J/m (ASTM D256)
- Tensile Elongation Yield: 38 MPa (ASTM D638)
- Tensile Elongation Break: Greater than 10% (ASTM D638)
- Heat Deflection Temperature: 90°C (ASTM D648)
The material used is Shogun Heat Resistant PLA.
The information provided is compiled from reliable sources and is accurate to the best of the company's knowledge. However, due to potential changes in data, safety standards, and regulations, Sa2p/Treed Filaments does not guarantee the completeness or ongoing accuracy of the information and disclaims liability for reliance on it. Users should ensure they have the most current data for their specific use.
Catalog excerpts
TREED FILAMENT DATASHEET MATERIAL: Shogun Heat Resistant PLA WE CARE ABOUT YOUR PRINTS DISCLAIMER The Information presented herein has been compiled from sources considered to be dependable and is accurate to the best of our knowledge. However, since data, safety standards, and government regulations are subject to change and the conditions of handling and use, or misuse, are beyond our control, Sa2p/Treed Filaments makes no warranty expressed or implied, with respect to completeness or continuing accuracy of the information contained herein and disclaims all liability for reliance thereon. User should satisfy himself that he has all current data relevant to his particular use.
Open the catalog to page 1All TreedFilaments catalogs and technical brochures
ABS ESD2 Pages
PAKK2 Pages
Stiron HIPS1 Page
Ultraflexx, Ultraflexx+1 Page
Gonzales High Speed PLA1 Page
MATERIAL: Fusion PLA1 Page
MATERIAL: Ecogenius PLA1 Page
