MATERIAL: P51- Polycarbonate

1 / 1 PageView full catalog

MATERIAL: P51- Polycarbonate

Product catalog summary

Printing Specifications

Extruder Temperature: 245° +/-10° C
Bed Temperature: 100° +/-10° C
Print Speed: 50-60 mm/s
Fan: 0-20%
Minimum Nozzle Diameter: 0.35 mm

Material Properties

Density: 1.2 g/cm³ (ISO 1183)
Water Absorption: 0.15% (ISO 62)
Tensile Modulus: 2340 MPa (ISO 527)
Tensile Stress at Break: 71 MPa (ISO 527)
Charpy Impact at 23°C: No Break (ISO 179)
Charpy Impact at -30°C: No Break (ISO 179)
Hardness: 72 shore M (ASTM D785)
Melting Point: 220 °C (ISO 11357)
Vicat Softening Temperature: 96 °C (ISO 306)

Material Information

Material: P51- Polycarbonate

Disclaimer

The information provided is compiled from reliable sources and is accurate to the best of the provider's knowledge. However, due to potential changes in data, safety standards, and regulations, Sa2p/Treed Filaments does not guarantee the completeness or accuracy of the information and disclaims liability for reliance on it. Users should ensure they have the most current data for their specific use.

Catalog excerpts

TREED FILAMENT DATASHEET WE CARE ABOUT YOUR PRINTS DISCLAIMER The Information presented herein has been compiled from sources considered to be dependable and is accurate to the best of our knowledge. However, since data, safety standards, and government regulations are subject to change and the conditions of handling and use, or misuse, are beyond our control, Sa2p/Treed Filaments makes no warranty expressed or implied, with respect to completeness or continuing accuracy of the information contained herein and disclaims all liability for reliance thereon. User should satisfy himself that he has all current data relevant to his particular use.

Open the catalog to page 1

MATERIAL: P51- Polycarbonate

MATERIAL: P51- Polycarbonate

Catalog excerpts

All TreedFilaments catalogs and technical brochures