1. Catalogs
  2. TreedFilaments
  3. MATERIAL: Ecogenius PLA
video corpo

MATERIAL: Ecogenius PLA

MATERIAL: Ecogenius PLA

Product catalog summary
Suggested Printing Specifications:
  • Extruder Temperature: 195° +/-10° Celsius
  • Bed Temperature: Cold to 80° Celsius
  • Print Speed: 60-80 mm/s
  • Fan Speed: 50-100%
  • Minimum Nozzle Diameter: 0.3 mm
Material Properties:
  • Density: 1.24 g/cm3 (ASTM D792)
  • Tensile Modulus: 65.5 MPa (ASTM D882)
  • Vicat Point: 55-60° Celsius (ASTM3418)
  • Melting Point: 144° Celsius (ASTM D3418)
Material: Ecogenius PLA
Disclaimer: The information is compiled from reliable sources and is accurate to the best of the provider's knowledge. However, due to potential changes in data, safety standards, and regulations, Sa2p/Treed Filaments does not guarantee the completeness or ongoing accuracy of the information and disclaims liability for reliance on it. Users should ensure they have the most current data for their specific use.
See more

Catalog excerpts

MATERIAL: Ecogenius PLA-1

TREED FILAMENT DATASHEET WE CARE ABOUT YOUR PRINTS DISCLAIMER The Information presented herein has been compiled from sources considered to be dependable and is accurate to the best of our knowledge. However, since data, safety standards, and government regulations are subject to change and the conditions of handling and use, or misuse, are beyond our control, Sa2p/Treed Filaments makes no warranty expressed or implied, with respect to completeness or continuing accuracy of the information contained herein and disclaims all liability for reliance thereon. User should satisfy himself that he has all current data relevant to his particular use.

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.