Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. TreedFilaments
  3. FlexMark 7, FlexMark 8, FlexMark 9
video corpo

FlexMark 7, FlexMark 8, FlexMark 9

FlexMark 7, FlexMark 8, FlexMark 9
1 / 1 PageView full catalog

FlexMark 7, FlexMark 8, FlexMark 9

Product catalog summary
Suggested Printing Specifications
  • Extruder Temperature: 225° +/-10°C for FlexMark7, FlexMark8, and FlexMark9.
  • Bed Temperature: Cold to 45°C for all models.
  • Print Speed: 10-20 mm/s for FlexMark7, 20-30 mm/s for FlexMark8, and 25-35 mm/s for FlexMark9.
  • Fan Speed: 0-50% for all models.
  • Minimum Nozzle Diameter: 0.3 mm for all models.
Material Properties
  • Density: 1.2 g/cm³ for FlexMark7, 1.22 g/cm³ for FlexMark8, 1.24 g/cm³ for FlexMark9 (ISO 1183).
  • Hardness: 70 sh/A for FlexMark7, 81 sh/A for FlexMark8, 93 sh/A for FlexMark9 (ISO 868).
  • Elongation at Break: 750% for FlexMark7 and FlexMark8, 600% for FlexMark9 (ISO 37).
  • Tensile Strain: 40 MPa for FlexMark7, 50 MPa for FlexMark8, 55 MPa for FlexMark9 (ISO 37).
  • Compression Set at 70°C: 35% for FlexMark7 and FlexMark8, 45% for FlexMark9 (ISO 815).
  • Charpy Impact at 23°C and -30°C: No Break for all models (ISO 179).
  • Abrasion Loss: 42 mm³ for FlexMark7, 40 mm³ for FlexMark8, 30 mm³ for FlexMark9 (ISO 4649).
Disclaimer
The information provided is compiled from reliable sources and is accurate to the best of our knowledge. However, due to potential changes in data, safety standards, and regulations, Sa2p/Treed Filaments does not guarantee the completeness or accuracy of the information and disclaims liability for reliance on it. Users should ensure they have the most current data for their specific use.
See more

Catalog excerpts

FlexMark 7, FlexMark 8, FlexMark 9-1

TREED FILAMENT DATASHEET MATERIAL: FlexMark 7, FlexMark 8, FlexMark 9 WE CARE ABOUT YOUR PRINTS DISCLAIMER The Information presented herein has been compiled from sources considered to be dependable and is accurate to the best of our knowledge. However, since data, safety standards, and government regulations are subject to change and the conditions of handling and use, or misuse, are beyond our control, Sa2p/Treed Filaments makes no warranty expressed or implied, with respect to completeness or continuing accuracy of the information contained herein and disclaims all liability for reliance thereon. User should satisfy himself that he has all current data relevant to his particular use.

 Open the catalog to page 1

All TreedFilaments catalogs and technical brochures

  1. ABS ESD
    ABS ESD

    2  Pages

  2. PAKK
    PAKK

    2  Pages

  3. Stiron HIPS
    Stiron HIPS

    1  Page

  4. Flexability, Flexability+
    Flexability, Flexability+

    1  Page

  5. Ultraflexx, Ultraflexx+
    Ultraflexx, Ultraflexx+

    1  Page

  6. Gonzales High Speed PLA
    Gonzales High Speed PLA

    1  Page

  7. MATERIAL: Fusion PLA
    MATERIAL: Fusion PLA

    1  Page

  8. MATERIAL: Ecogenius PLA
    MATERIAL: Ecogenius PLA

    1  Page

  9. MATERIAL: Shogun Heat Resistant PLA
    MATERIAL: Shogun Heat Resistant PLA

    1  Page

  10. MATERIAL: Kyotoflex BioFlex
    MATERIAL: Kyotoflex BioFlex

    1  Page

  11. MATERIAL: P51- Polycarbonate
    MATERIAL: P51- Polycarbonate

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.