1. Catalogs
  2. TreedFilaments
  3. Flexability, Flexability+
video corpo

Flexability, Flexability+

Flexability, Flexability+

Product catalog summary
Printing Specifications
  • Extruder Temperature: 240° +/-10°C
  • Bed Temperature: 95° +/-10°C
  • Print Speed: 30-40 mm/s
  • Fan Speed: 0-30%
  • Minimum Nozzle Diameter: 0.35 mm
Material Properties
  • Density: 1 g/cm3 (ISO 1183)
  • Water Absorption: Flexability: 0.4%, Flexability+: 0.5% (ISO 62)
  • Tensile Strain (Break): Flexability: 32 MPa, Flexability+: 40 MPa (ISO 527)
  • Charpy Impact at 23°C: No Break (ISO 179)
  • Charpy Impact at -30°C: No Break (ISO 179)
  • Hardness: Flexability: 74 - 22 sh/A - sh/D, Flexability+: 90 - 42 sh/A - sh/D (ISO 62)
  • Melting Point: Flexability: 134°C, Flexability+: 160°C (ISO 11357)
  • Vicat Point: Flexability: 58°C, Flexability+: 131°C (ISO 306)
Disclaimer
The information provided is compiled from reliable sources and is accurate to the best of our knowledge. However, due to potential changes in data, safety standards, and regulations, Sa2p/Treed Filaments does not guarantee the completeness or accuracy of the information and disclaims liability for reliance on it. Users should ensure they have the most current data for their specific use.
See more

Catalog excerpts

Flexability, Flexability+-1

TREED FILAMENT DATASHEET MATERIAL: Flexability, Flexability+ WE CARE ABOUT YOUR PRINTS DISCLAIMER The Information presented herein has been compiled from sources considered to be dependable and is accurate to the best of our knowledge. However, since data, safety standards, and government regulations are subject to change and the conditions of handling and use, or misuse, are beyond our control, Sa2p/Treed Filaments makes no warranty expressed or implied, with respect to completeness or continuing accuracy of the information contained herein and disclaims all liability for reliance thereon. User should satisfy himself that he has all current data relevant to his particular use.

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.