Drawing and Projection
The document specifies the use of third-angle projection for the technical drawing.
Specifications
- Body Material and Finish: ABS plastic, dark grey color.
- Top Ring: Aluminum, black anodised finish.
- Top Plate: 2 mm thick aluminum, anodised.
- Ball: Diameter 0.2 inches, black color.
Resolution and Axes
- X & Y Axis Resolution: 960 edges per ball revolution.
- Z Axis Resolution: 512 edges per top ring revolution.
Connector Details
- 8-way header connector, square pin, 2.5 mm pitch.
- Compatible cable assembly supplied.
Electrical Specifications
- Supply Voltage: +5 V DC with ±15% tolerance.
- Maximum Current: 5 mA.
- Output Signal: TTL quadrature signal.
Cabling
- 100 ribbon cable, 18 conductors.
Pin Description
| Pin | Description |
|---|
| 1 | +5 V Supply |
| 2 | X Channel B |
| 3 | X Channel A |
| 4 | Y Channel B |
| 5 | Y Channel A |
| 6 | Z Channel B |
| 7 | Z Channel A |
| 8 | Ground (GND) |
Connector Housing
8-way Molex 5051 series housing.
Materials and Finish Notes
Refer to notes section 10.25 for detailed materials and finish information.
Manufacturer and Contact Information
Company: Sterling Corporation
Location: Ringwood, Hants, UK, BH24 EU
Website: www.traxsys.com
Email: [email protected]
Phone: +44 (0)1425 463100
Fax: +44 (0)1425 463111
Design and Revision History
- Design copies reserved by Traxsys Input Products.
- Scale: Not to scale (NTS).
- Dimensions in millimeters.
- Issue Dates and Changes:
- 12.6.04
- 23.2.05 - New drawing PRJ158623
- Other revisions: 30.01.06, 18.10.06
Mechanical Details
- Mounting: Panel mounted.
- Tracker Ball Diameter: 3 inches.
- Hole sizes: 4 holes of 3.2 mm diameter, 6.8 mm diameter from underside.
See more