*mydirectindustry

TS 6200

Product catalog summary

Overview: The TRANSNORM TS 6200 FH is an angled belt conveyor designed for efficient product handling at 30° or 45° angles. It is available in merge or divert versions, making it suitable for connecting sorting or collecting conveyors. The system is optimized for traction and reduced power consumption, with a non-rotating angled pulley and automatic belt tracking.

Technical Advantages:

Reliable operation with optimum power transmission and quiet running.
Specially coated pulley for low friction coefficient belts.
Easy belt replacement from above.

Fields of Application:

Airport baggage conveyor systems.
Sorting and distribution systems for express delivery and parcel services.
Conveyor systems for boxes and containers.
Order picking and shipping systems.

Key Performance Data:

Maximum conveyor speed: 2.0 m/s.
Maximum weight load: 50 kg/m.
Conveyor angles: 30°, 45°.
Maximum nominal width: 1,000 mm.

Technical Data:

Nominal width (BN): up to 1,000 mm.
Nominal angle (wN): 30°, 45°.
Minimum conveyor height (HF): 300 mm.
Drive pulley diameter (DT): 160 mm.
Tail pulley diameter (DR): 65 mm.
Angled pulley diameter (DS): 40 mm.
Maximum load capacity (QF): 50 kg/m.
Maximum conveyor speed (vF): 2.0 m/s.

Main Dimensions and Designs: The conveyor is available in various configurations for merging and diverting, with specific dimensions for different nominal widths and angles.

Catalog excerpts

TS 6200 Angled Belt Conveyor TECHNICAL DATASTEET MERGE DIVERT The TRANSNORM TS 6200 FH is a belt conveyor with an angled terminal at one end allowing product to feed onto or discharge from a main line at 30° or 45°. Using a single width belt and small diameter fixed-position terminal pulleys, it is possible to handle a wide variety of products. The conveyor is available in either merge or divert versions. The main function of the TS 6200 is to connect sorting or collecting conveyors. This continuous development of the series, has optimized traction and reduced power consumption. The angled pulley is a non rotating 40 mm steel shaft fixed to the main frame. Both conveyor versions use the same frame geometry. The drive station is configured to suit the conveying direction. Belt tracking is controlled by a guide station which continuously adjusts the belt automatically. The TS 6200 module is used at airports and distribution centres around the world – in many cases in 24/7 operations. Three thousand TS 6200 units are installed at the UPS Hub in Louisville, USA. TECHNICAL ADVANTAGES Optimum power transmission for reliable operation and quiet running Specially coated pulley to suit the low friction coefficient belt Suitable for airport baggage Belts can be changed from above FIELDS OF APPLICATION Airport baggage conveyor systems Sorting and distribution systems for express delivery and parcel services Conveyor systems for boxes and containers Order picking and shipping systems KEY PERFORMANCE DATA Conveyor speed Weight load Conveyor angle Nominal width

Open the catalog to page 1

MAIN DIMENSIONS Technical Design Nominal angle Drive pulley diameter Tail pulley diameter Angled pulley diameter Conveyor length minimum LF (mm) LF wN = 30° DESIGNS DARH DARH: Divert right DALH: Divert left MARH: Merge right MALH: Merge left www.transnorm.com TRANSNORM SYSTEM GmbH | Förster Str. 2 | 31177 Harsum | Germany | Telephone: +49 5127 402-0 | e-Mail: [email protected] Subject to technical modification | © TRANSNORM SYSTEM GmbH 2020 | TS 6200 EN

Open the catalog to page 2

TS 6200

TS 6200

Catalog excerpts

All Transnorm System GmbH catalogs and technical brochures