TECHNICAL DATASHEET your best move The TS 2960 is an inclined roller conveyor, which can be used as an alignment conveyor in parcel distribution centers and in various intralogistics applications. The system is driven by a shaft-mounted gear motor positioned with a drive chain positioned diagonally below the conveyor. The drive belt is pressed directly into the support roller. This drive concept is characterized by extremely quiet running and a consistently good power transmission to all rollers, even at high conveyor speeds of up to 2.6 m/s. In combination with a driven side guide (Motorized diverter TS 6565), this robust alignment conveyor is suitable for rugged use in conveyor systems for package and express service providers. The narrow roller partition and the precisely placed driven side guide enable secure alignment even of very flat or limp conveyor goods. TECHNICAL ADVANTAGES ■ High conveyor speed with simultaneous high energy efficiency through a central drive ■ Consistently good power transmission to all rollers ■ Low-noise and low-maintenance operation ■ Even suitable for very flat or limp loads ■ Parcel and express conveyor systems ■ Distribution hubs of trade and logistics service providers ■ Sorting lines in carton and bin conveyor systems ■ Conveyor nominal width 400 - 1,200 mm

MAIN DIMENSIONS Technical Design Technical Data Technical Data Nominal angle Conveyor height, min. Roller diameter Roller pitch As standard, this module is designed for dynamic operation. BASIC DESIGN 1. Drive station 2. Supports 3. Conveyor track 4. Drive chain 2

DRIVE STATION transnormyour best move Drive chain Hf Side guide height mm BN + 100 Sheet metal guide C-section guide Other values on request

www.transnorm.com TRANSNORM SYSTEM GmbH | Förster Str. 2 | 31177 Harsum | Germany | Telephone: +49 5127 402-0 | e-Mail: [email protected] Subject to technical modification | © TRANSNORM SYSTEM GmbH 2020 | TS 2960 EN V3.0