your best move -|-CAREFUL HANDLING + POSITIVE POSITIONING The belt conveyor TS 1200 with terminal drive is the ideal choice for in-house transport of a wide range of cartons, packed and unpacked unit loads as well as bins and trays. It is a sophisticated and standard belt conveyor system that is characterised by a high degree of flexibility and a comprehensive range of accessories. A special feature of this type is the terminal drive which allows a very flat and short design. This makes the TS 1200 a most economic solution, suitable as a short track conveyor, discharge conveyor or timing belt. Belt conveyor systems provided by TRANSNORM are characterised by a long service life and reliability as well as low-noise operation. Extremely simple handling of adjustment for the belt movement and belt replacement (if at all necessary), as well as a great degree of flexibility for subsequent conversions, are some aspects that also speak in favour of making an investment in TRANSNORM's equipment and technology. There are different belt materials and lateral guides available for adapting to the requirements of the goods being conveyed. The belt conveyors of the TS 1200 series can be combined with other key components of TRANSNORM. For this purpose, please refer in particular to the following: ■ TS 1600 Belt curve conveyors ■ TS 6200 Angled belt conveyors ■ TS 1100 Belt conveyor with central drive TECHNICAL ADVANTAGES ■ Most economic short track conveyor ■ High speed conveying with low noise level ■ Careful handling of fragile loads ■ Positive drive between load and belt surface ■ Modular design with standard devices and high flexibility for subsequent conversions ■ Wear resistant drive pulley ■ Parcel conveying systems with a wide range of box sizes and qualities ■ Order picking and shipping systems ■ Order return systems ■ Order receipt and dispatch areas ■ Loads with uneven bases that are not suitable for roller conveyors or bags ■ Nominal belt width

As standard, this module is designed for dynamic operation. Reverse operation is possible with restrictions after technical inspection and approval.

DRIVE STATION PULLEY Compact drive with shaft mounted motor Standard pulleys ■ Direct drive with shaft mounted motor ■ Frame galvanized steel ■ The type of pulley depends on the load, conveyor length, and width, conveyor speed and junction to adjacent conveyors. Aluminium side guide Steel side guides C-Section guides Height Side Guide: 200 mm Height Side Guide: 100 - 400 mm Hight Side Guide: <120mm

ADD-ONS Supports Photocell support brackets www.transnorm.com TRANSNORM SYSTEM GmbH | Förster Str. 2 | 31177 Harsum | Germany | Telephone: +49 5127 402-0 | e-Mail: [email protected] Subject to technical modification! | © TRANSNORM SYSTEM GmbH 2025 | TS 1200 EN V5.0