1. Catalogs
  2. TRANS-TEK
  3. Series D100 Specs

Series D100 Specs

Series D100 Specs

Product catalog summary
Series P010 OEM Oscillator/Demodulator
  • Pinout: Utilizes a standard Berg model #66953-06 connector for easy installation on PC boards. Recommended to clamp the board onto the main PC board assembly in vibration-prone environments.
  • Connections: Includes various pins for non-lead end output, oscillator high output, unfiltered demodulator output, power supply, and common connections.
Series D100 Dual DC Power Supply
  • Overview: Regulated, preset voltage sources suitable for DC excited transducers and IC function modules. Encapsulated components ensure reliable operation in laboratory and factory settings.
  • Features: Compatible with DC LVDTs and ADTs, high regulation, short circuit protection, and compact packaging.
  • Specifications: Models D12.200 and D15.200 offer outputs of ±12 VDC and ±15 VDC respectively, with a current of 200 mA. Input range is 105 to 125 VAC, 50 to 400 Hz. Output voltage tolerance is ±1% with line and load regulation at 0.05% and 0.10% max, respectively.
  • Protection and Isolation: Overcurrent protection with current limiting and I/O isolation of 50 MegaOhms.
  • Environmental Conditions: Operating temperature range is -13°F to +160°F (-25°C to +71°C) with storage temperature from -40°F to +185°F (-40°C to +85°C).
  • Physical Characteristics: Dimensions are 2.5 x 4.45 x 1.25 inches, with an approximate weight of 1.6 lbs.
See more

Catalog excerpts

Series D100 Specs-1

Dual DC Power Supply The Series D100 power supplies are regulated, preset voltage sources, ideally suited for DC excited transducers, discrete and IC function modules. All components are encapsulated to provide reliable continuous operation to rated specifications in laboratory and factory environments. They are equipped with an on-off switch, line cord, binding post terminals, rubber feet and a #440 tapped hole located on the bottom side for permanent mounting. The hole is connected to earth ground via the power line cord ground terminal. Dual voltage power supplies allow the user to choose the transducer excitation voltage; for example, Model D12.200 can be used to power a transducer with 12 VDC or 24 VDC. To excite the transducer with 12 VDC, connect the transducer +INPUT and -INPUT to the power supply +V and COM terminals, respectively (or to the power supply COM and -V terminals, respectively). To excite the transducer with 24 VDC, connect the transducer +INPUT and -INPUT to the power supply +V and -V terminals, respectively. DIMENSIONAL DRAWING The Series P010 contains a standard Berg model #66953-06 connector for easy installation on user’s PC Boards. For applications where the electronics will be subject to vibration, it is recommended that the Series P010 board be clamped onto the user’s main PC board assembly. KEY FEATURES • Compatible with DC LVDTs and ADTs • Short Circuit Protected • High Regulation FUNCTION LVDT Output, Non-Lead End Oscillator Output High Not Used Unfiltered Demodulator Output -15 VDC Power Supply Common LVDT Output, Lead End Not Used Not Used Not Used +15 VDC Power Supply Analog Output • Compact Package INTERCONNECTION DIAGRAM COMMON SPECIFICATIONS INPUT STORAGE TEMPERATURE OUTPUT VOLTAGE TOLERANCE Line Cord, 3-wire, 5 feet long, terminated in line plug with earth ground. OUTPUT TERMINALS TEMPERATURE COEFFICIENT Black - Common OVERCURRENT PROTECTION Current Limiting: Either input to common or other output, indefinitely -13°F to +160°F (-25°C to +71°C) BLOCK DIAGRAM OPERATING TEMPERATURE Violet - Negative Voltage DIMENSIONS In. (mm) WxLxH APPROXIMATE WEIGHT SPECIFICATIONS MODEL NUMBER

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.