Motoinverter

1 / 6 PagesView full catalog

Motoinverter

Product catalog summary

Main Features:

Control Method: V/F - Sensorless Vector
Output Frequency: 10 ~ 70Hz
PID Control
Integrated EMC Filter
Analog Control: -10V ~ +10V
Communication Protocols: RS-485 “LG BUS”, ModBus/RTU, Profibus-DP, CanOPEN (optional)
CE Mark for Europe

Product Overview:

The DRIVEMOT is a high-efficiency, high-performance motor inverter designed for flexible and reliable automation solutions. It combines an electric motor with an LS inverter to optimize energy use, achieving up to 30% energy savings compared to conventional systems. The motor characteristics are pre-installed in the inverter logic to enhance efficiency and reduce energy consumption.

Advantages:

Compact design and simple installation
Space optimization in the cabinet
High starting torque at low speeds
Suppression of resonance frequencies
Factory preset start-up
IGBT technology at 12 kHz for high efficiency and low magnetic noise

Production Range:

Single-phase: 0.4 kW to 2.2 kW, Voltage: 1x200-240V +/-10%
Three-phase: 0.4 to 22kW, Voltage: 3x200-240V +/-10% and 3x380-480V +/-10%

Compliance:

The DRIVEMOT complies with EU low voltage directives and harmonized standards for electrical safety.

Motor Characteristics:

Frequency: 10 to 70 Hz
Isolation: Class F, Class H on request
Coupling: Unified flanges B5-B14, removable feet B3
Shaft: Steel C43 with DIN 748-3 tolerances
Balancing: Standard “N” to ISO 2373

Control Features:

Control Method: V/f, Sensorless vector
Frequency Setting: Digital: 0.01Hz, Analog: 0.1Hz
Overload Capacity: 150% for 1 min., 200% for 30 sec.
Operation Method: Keypad, Terminal, RS485
Emergency Stop: Interrupts drive output

Security Features:

Inverter Trip: Over voltage, Low voltage, Over current, Ground fault, etc.
Inverter Alarm: Stall prevention, overload
Momentary Power Loss: Auto restart available

Environmental Conditions:

Ambient Temperature: -10°C to 50°C
Storage Temperature: -20°C to 65°C
Humidity: Below 90% RH (no condensation)
Altitude and Vibration: Max 1000m, 5.9m/sec²
Application Location: Away from corrosive gases, oil mist, or dust

Catalog excerpts

Drivemot Caratteristiche principali: • Metodo di Controllo: Tensione/Frequenza - Vettoriale Sensorless • Range Frequenza Standard: 10 ~ 70Hz • Controllo PID integrato • Filtro EMC integrato • Tastiera integrata per lettura e impostazione parametri • Controllo Analogico: -10V ~ +10V • Protocolli di comunicazione: RS-485 “LG BUS” - ModBus/RTU** Profibus-DP** - CanOPEN** • Marchio CE per Europa ** Optional Main Features: • Control Method: V/F - Sensorless Vector • Output Frequency Standard: 10 ~ 70Hz • PID Control • Integrated EMC Filter • Integrated Keyboard for reading and setting parameters •...

Open the catalog to page 2

ITRAMECDRIVEMOT DRIVEMOT Tensione Caratteristiche motore Motor characteristics Input interface Funzioni operative Frenatura DC, limite di frequenza, salto di frequenza, seconda funzione compensazione di scorrimento, impedimento alia rotazione contraria, auto restart, controllo PID Operation function DC braking, Frequency limit, Frequency jump, Second function, Slip compensation, Reversing prevention, Auto restart, PID control

Open the catalog to page 3

Funzioni di protezione Security Features Ambient temperature Protocolli di comunicazione disponibili Torque/speed characteristic Caratteristica coppia/velocita

Open the catalog to page 4