Instruction N 8202

Instruction N 8202

Instruction N 8202

Product catalog summary
Electrical Connection: The device should be connected using terminal screws with a size range of 0.75 to 2.5 mm². The clamping screw is caulked and should not be unscrewed. Ensure to use the appropriate tool and prescribed torque when screwing or unscrewing the instrument, avoiding the use of the case as a working surface.
Operating Pressure: The device operates within various pressure ranges, from 0 to 600 bar, with corresponding overpressure limits up to 1000 bar.
Temperature Specifications: The operating temperature range is -25°C to +85°C, while the media temperature can range from -25°C to +125°C. The storage temperature range is -40°C to +85°C.
Torque Moment Pressure Connection: The maximum torque for the pressure connection is 25 Nm.
Output and Load Resistance: The output is 4 to 20 mA, with a load resistance calculated as (USUPPLY – 12V)/20mA, and a supply voltage range of 12 to 34 VDC.
IP Protection: The device has an IP65 protection rating.
Calibration: Adjustments to the factory calibration void any warranty. Calibration involves zero point and span adjustments.
Dimensions: The device has a connection size of M20x1.5 and supports cable diameters from 6 to 13 mm.
Manufacturer Information: Trafag AG, located at Industriestrasse 11, CH-8608 Bubikon, Switzerland. Contact via phone at +41 44 922 32 32 or fax at +41 44 922 32 33. Website: www.trafag.com.
See more

Catalog excerpts

Instruction N 8202-1

Betriebsanleitung Mode d‘emploi Instructions Elektrischer Anschluss / Connexion électrique / Electrical connection Load resistance (max.) (USUPPLY –12V)/20mA IP-Schutzart / IP-Protection / IP-Protection IP65 Anziehdrehmoment Druckanschluss / Couple de serrage raccord de pression / Torque moment pressure connection max. 25Nm Betriebstemperatur / Température de service / Operating temperature -25°C ... +85°C Medientemperatur / Température du fluide / Media temperature -25°C ... +125°C Lagertemperatur / Température de stockage / Storage temperature -40°C ... +85°C Betriebsdruck / Pression de fonctionnement / Operating pressure Bereich Plage Range [bar] Trafag AG Industriestrasse 11 CH-8608 Bubikon

 Open the catalog to page 1
Instruction N 8202-2

Massbilder / Cotes d‘encombrement / Dimensions Schrauben Sie das Gerät nur über die Schlüsselflächen mit einem geeigneten Werkzeug und dem vorgeschriebenen Drehmoment ein bzw. aus. Verwenden Sie zum Ein- bzw. Ausschrauben nicht das Gehäuse als Angriffsfläche. Elektrischer Anschluss: Schraubklemme 0.75 ... 2.5 mm2. Die Klemmschraube ist verstemmt und darf nicht herausgedreht werden. Screw in or unscrew the instrument only via the flats using a suitable tool and the prescribed torque. Do not use the case asworking surface for screwing in or unscrewing the instrument. Electrical connection: Terminal...

 Open the catalog to page 2

All Trafag AG sensors & controls catalogs and technical brochures

  1. TMT502

    4  Pages

  2. Navitrag

    4  Pages

  3. Hydraulics

    24  Pages

  4. TMP301

    10  Pages

  5. TMP203

    5  Pages

  6. Shipbuilding

    16  Pages

  7. H70650a

    4  Pages

  8. H70649a

    4  Pages

  9. H70603a

    2  Pages

  10. H70600

    2  Pages

  11. H72302

    5  Pages

  12. H72304

    9  Pages

  13. H72303

    10  Pages

  14. H72207

    4  Pages

  15. H72206

    4  Pages

  16. H70694

    2  Pages

  17. H72335

    4  Pages

  18. H70697

    2  Pages

  19. H72307

    9  Pages

  20. Flyer ND 8204

    2  Pages

  21. Flyer N 8202

    2  Pages

  22. Flyer ADS 319

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.