*mydirectindustry

Instruction FPT 8235

Product catalog summary

Technical Specifications:
1. Load Resistance and Supply Voltage: The document specifies load resistance and supply voltage for different output ranges, such as 4-20 mA and 0-5 VDC, with specific resistance and current requirements.
2. Mounting Torque: The recommended mounting torque is 20-25 Nm for non-lubricated and 15-20 Nm for lubricated conditions.
3. Temperature Ranges: Operating temperature is from -40°C to +85°C, media temperature from -40°C to +125°C, and sealing temperature varies based on material (FPM or NBR).

Electrical Connections:
1. Type and Serial Number: The document provides a type code and serial number format for identification.
2. Ingress Protection: The device offers IP65 and IP67 protection levels.
3. Pin Configuration: Detailed pin configurations are provided for different type codes.

Pressure Connection:
1. Connection Details: Specifications for pressure connections, including dimensions and thread types, are provided.
2. Material Specifications: Information on sensor and housing materials is included.

Additional Information:
1. Sealing Temperature Range: Specific ranges for different materials are reiterated.
2. Welding Flange: Details for ordering a welding flange for G1/2" connections are provided.

Catalog excerpts

8235 Flush Membrane Transmitter FPT Technical specification Mounting torque: 20 ... 25 Nm not lubricated / 15 ... 20 Nm lubricated Operating temperature: –40°C ... +85°C Media temperature: –40°C ... +125°C Sealing temperature range: –15°C ... +125°C Mat. FPM (FKM) –25°C ... +100°C Mat. NBR Type label description Manufacturing date (W/Y) Type code Serial number Measuring range Supply positive Supply voltage Type : 8235.XX.XXXX S/N : YYYYYY-ZZZ 16/11 Range : -1...9 bar-G max.: 20 bar Us : 9...30V DC (2) Us : 4...20mA (1) Output signal Packard Metri Pack 3–pol. Industrial Standard Type code Load resistance provided female connector is mounted according to instructions * shield in the device is not connected We reserve the right to make alternations as technical progress m

Open the catalog to page 1

Electrical connections Material Housing Sealing temperature range: –15°C ... +125°C Mat. FPM (FKM) –25°C ... +100°C Mat. NBR Mounting thread G1/2“ DIN EN ISO 1179-1 min. 21 sealing surface Welding flange for G1/2“ (1.4301) Ordering No. C27804 Connection of the measuring equipment Current output 2-wires single arrangement multiple arrangement Us (pos. Supply) shield single arrangement multiple arrangement Us (pos. Supply) shield

Open the catalog to page 2

All Trafag AG sensors & controls catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list