Instruction EPR 8293
2Pages

{{requestButtons}}

Catalog excerpts

Instruction EPR 8293 - 1

Betriebsanleitung Mode d'emploi Instructions Pressure Transmitter EPR/EPI/EPN Elektrischer Anschluss / Raccordement électrique / Electrical connection Schutzart/ Protection Ausführung Connexion électr. Electrical connection Ausgangssignal Signal de sortie Output standard with accessory 92 black yellow/green brown blue black yellow/green *Entlüftung über das Kabelende/ Ventilation par extrémité du câble/ Ventilation via cable end 2) Ausführung/ Connexion électrique/ Electrical connection 04/05/25/02: nur mit vorschriftsmässig montierter Kabeldose gültig/ valable seulement avec fiche femelle montée selon instructions/ provided female connector is mounted according to instructions Load resistance ISUPPLY USUPPLY 5 VDC ±0.25 VDC ratiometrisch/ ratiométrique/ ratiometric 829X.XX.XXXX.XX.23... Anziehdrehmoment Druckanschluss/ Couple de serrage raccord de pression / Torque moment pressure connection 829X.XX.XX17.XX... anwendungsspezifisch/dépend del'application/depending on application 25 Nm ± 5Nm (Manometer/ manomètre/ manometer) M14x1.5 (Kegeldichtung/ Joint conique/ Conical seal: 58°): 30 Nm ± 5Nm M18x1.5 (Kegeldichtung/ Joint conique/ Conical seal: 58°): 30 Nm ± 5Nm Betriebstemperatur / Température de service / Operating temperature Lagertemperatur / Température de stockage / Storage temperature –40°C ... +125°C (–40°F ... +260°F) Trafag AG Industriestrasse 11 CH-8608 Bubikon

Open the catalog to page 1
Instruction EPR 8293 - 2

Überdruck / Surpression/ Overpressure Nenndruck Pression nominal Nominal pressure Überdruck Surpression Overpressure Nenndruck Pression nominal Nominal pressure Überdruck Surpression Overpressure Massbilder / Cotes d'encombrement / Dimensions 38.5 (p≤2.5bar, p>250bar) 36.6 (2.5bar < p ≤250bar) Cable clamping range 6...11mm Gewinde-Bohrung Taraudage Tapped hole Gewinde-Bohrung Taraudage Tapped hole 829X.XX.XX28.XX.XX Trafag AG Industriestrasse 11 CH-8608 Bubikon We reserve the right to make alternations as technical progress may warrant. 1. Remove the female connector 2. Release the black...

Open the catalog to page 2

All Trafag AG sensors & controls catalogs and technical brochures

  1. TMT502

    4 Pages

  2. Navitrag

    4 Pages

  3. Hydraulics

    24 Pages

  4. TMP301

    10 Pages

  5. TMP203

    5 Pages

  6. Shipbuilding

    16 Pages

  7. H70650a

    4 Pages

  8. H70649a

    4 Pages

  9. H70603a

    2 Pages

  10. H70600

    2 Pages

  11. H72302

    5 Pages

  12. H72304

    9 Pages

  13. H72303

    10 Pages

  14. H72207

    4 Pages

  15. H72206

    4 Pages

  16. H70694

    2 Pages

  17. H72335

    4 Pages

  18. H70697

    2 Pages

  19. H72307

    9 Pages

  20. Flyer N 8202

    2 Pages