*mydirectindustry

Catalogs
Trafag AG sensors & controls
Instruction EPN/EPNCR 8298

Instruction EPN/EPNCR 8298

Product catalog summary

Specifications:
The pressure transmitter models EPR/EPI/EPN operate within a temperature range of -40°C to +125°C (-40°F to +260°F) for both storage and operating conditions. The electrical connection supports a supply voltage of 9 to 32 VDC with an output of 4 to 20 mA or 0.5 to 4.5 VDC, depending on the model.

Torque Specifications:
Various models have specific torque requirements for pressure connections, such as 25 Nm ± 5Nm for G 1/4" and G 1/2" connections, and 30 Nm ± 5Nm for M14x1.5 and M18x1.5 connections.

Protection and Connection:
The devices offer different levels of ingress protection, including IP65 and IP69K, depending on the configuration and proper installation of connectors. Electrical connections vary, with options like EN175301-803-A and MIL-C 26482.

Pressure Ratings:
The nominal pressure ranges from 0 to 2500 bar (0 to 35000 psi), with corresponding overpressure limits provided for each range.

Installation Instructions:
To align the connector, remove the female connector, release the black nut, adjust the pins (max. ± 120°), and then tighten the black nut.

Dimensions:
The document provides detailed dimensions for various models, indicating specific measurements for different pressure ranges and connection types.

Catalog excerpts

Betriebsanleitung Mode d'emploi Instructions Pressure Transmitter EPR/EPI/EPN Elektrischer Anschluss / Raccordement électrique / Electrical connection Schutzart/ Protection Ausführung Connexion électr. Electrical connection Ausgangssignal Signal de sortie Output standard with accessory 92 black yellow/green brown blue black yellow/green *Entlüftung über das Kabelende/ Ventilation par extrémité du câble/ Ventilation via cable end 2) Ausführung/ Connexion électrique/ Electrical connection 04/05/25/02: nur mit vorschriftsmässig montierter Kabeldose gültig/ valable seulement avec fiche femelle montée selon instructions/ provided female connector is mounted according to instructions Load resistance ISUPPLY USUPPLY 5 VDC ±0.25 VDC ratiometrisch/ ratiométrique/ ratiometric 829X.XX.XXXX.XX.23... Anziehdrehmoment Druckanschluss/ Couple de serrage raccord de pression / Torque moment pressure connection 829X.XX.XX17.XX... anwendungsspezifisch/dépend del'application/depending on application 25 Nm ± 5Nm (Manometer/ manomètre/ manometer) M14x1.5 (Kegeldichtung/ Joint conique/ Conical seal: 58°): 30 Nm ± 5Nm M18x1.5 (Kegeldichtung/ Joint conique/ Conical seal: 58°): 30 Nm ± 5Nm Betriebstemperatur / Température de service / Operating temperature Lagertemperatur / Température de stockage / Storage temperature –40°C ... +125°C (–40°F ... +260°F) Trafag AG Industriestrasse 11 CH-8608 Bubikon

Open the catalog to page 1

Überdruck / Surpression/ Overpressure Nenndruck Pression nominal Nominal pressure Überdruck Surpression Overpressure Nenndruck Pression nominal Nominal pressure Überdruck Surpression Overpressure Massbilder / Cotes d'encombrement / Dimensions 38.5 (p≤2.5bar, p>250bar) 36.6 (2.5bar < p ≤250bar) Cable clamping range 6...11mm Gewinde-Bohrung Taraudage Tapped hole Gewinde-Bohrung Taraudage Tapped hole 829X.XX.XX28.XX.XX Trafag AG Industriestrasse 11 CH-8608 Bubikon We reserve the right to make alternations as technical progress may warrant. 1. Remove the female connector 2. Release the black nut...

Open the catalog to page 2

Instruction EPN/EPNCR 8298

Instruction EPN/EPNCR 8298

Catalog excerpts

All Trafag AG sensors & controls catalogs and technical brochures