Instruction EPI 8297

Instruction EPI 8297

Instruction EPI 8297

Product catalog summary

Overview

This document provides detailed technical specifications, installation instructions, and operational parameters for the Trafag Pressure Transmitter models EPR, EPI, and EPN, designed to operate within a temperature range of –40°C to +125°C (–40°F to +260°F).

1. Temperature Specifications

  • Storage Temperature: –40°C to +125°C (–40°F to +260°F)
  • Operating Temperature: –40°C to +125°C (–40°F to +260°F)

2. Electrical Connection and Output Signals

  • Output Types: 4–20 mA current loop (9–32 VDC supply), 0.5–4.5 VDC ratiometric output (5 VDC supply ±0.25 VDC)
  • Load Resistance: For 4–20 mA output, load resistance depends on supply voltage (USupply - 9 V) / 20 mA; for voltage output, ≥15 kΩ
  • Electrical Connectors: Various connector types including EN175301-803-A (DIN43650-A), MIL-C 26482, and cable options with ventilation via cable end
  • Protection Ratings: IP65 standard, IP67, and IP69K available depending on configuration and proper connector mounting

3. Mechanical Specifications and Installation

  • Pressure Connection Torque: Specified torque values for different thread types:
    • G 1/4": 25 Nm ± 5 Nm
    • R 1/4": Application-specific
    • G 1/2" (manometer): 25 Nm ± 5 Nm
    • NPT 1/4" and 1/2": 25 Nm ± 5 Nm
    • M14x1.5 and M18x1.5 (conical seal 58°): 30 Nm ± 5 Nm
  • Cable Clamping Range: 6 to 11 mm diameter
  • Connector Alignment Procedure: Remove female connector, loosen black nut, adjust pins up to ±120°, retighten nut

4. Dimensions

  • Various model-specific dimensions provided, e.g., diameter approximately 27 mm, length varying between 41 mm and 65 mm depending on pressure range and model
  • Specific dimensions vary with nominal pressure and overpressure ratings

5. Pressure Ratings

The transmitters cover a wide range of nominal pressures and overpressure limits, summarized as follows:

Nominal Pressure (bar)Nominal Pressure (psi)Overpressure (bar)Overpressure (psi)
0 ... 2.50 ... 30570
0 ... 4.00 ... 508115
0 ... 6.00 ... 10012170
0 ... 100 ... 15020290
0 ... 160 ... 25032464
0 ... 250 ... 40050725
0 ... 400 ... 500801160
0 ... 600 ... 10001201740
0 ... 1000 ... 15002002900
0 ... 1600 ... 20003204640
0 ... 2500 ... 30005007250
0 ... 4000 ... 500080011600
0 ... 6000 ... 7500100014500
0 ... 10000 ... 10000180026100
0 ... 16000 ... 20000300043500
0 ... 20000 ... 30000300043500
0 ... 25000 ... 35000300043500

6. Additional Notes and Recommendations

  • Proper mounting of connectors and adherence to torque specifications are critical for ensuring IP protection ratings and device reliability.
  • Ventilation is provided via cable end for cable-connected versions.
  • The manufacturer reserves the right to make technical changes to improve the product.
  • Contact information for Trafag AG is provided for technical support and inquiries.
See more

Catalog excerpts

Instruction EPI 8297-1

Betriebsanleitung Mode d'emploi Instructions Pressure Transmitter EPR/EPI/EPN Elektrischer Anschluss / Raccordement électrique / Electrical connection Schutzart/ Protection Ausführung Connexion électr. Electrical connection Ausgangssignal Signal de sortie Output standard with accessory 92 black yellow/green brown blue black yellow/green *Entlüftung über das Kabelende/ Ventilation par extrémité du câble/ Ventilation via cable end 2) Ausführung/ Connexion électrique/ Electrical connection 04/05/25/02: nur mit vorschriftsmässig montierter Kabeldose gültig/ valable seulement avec fiche femelle montée selon instructions/ provided female connector is mounted according to instructions Load resistance ISUPPLY USUPPLY 5 VDC ±0.25 VDC ratiometrisch/ ratiométrique/ ratiometric 829X.XX.XXXX.XX.23... Anziehdrehmoment Druckanschluss/ Couple de serrage raccord de pression / Torque moment pressure connection 829X.XX.XX17.XX... anwendungsspezifisch/dépend del'application/depending on application 25 Nm ± 5Nm (Manometer/ manomètre/ manometer) M14x1.5 (Kegeldichtung/ Joint conique/ Conical seal: 58°): 30 Nm ± 5Nm M18x1.5 (Kegeldichtung/ Joint conique/ Conical seal: 58°): 30 Nm ± 5Nm Betriebstemperatur / Température de service / Operating temperature Lagertemperatur / Température de stockage / Storage temperature –40°C ... +125°C (–40°F ... +260°F) Trafag AG Industriestrasse 11 CH-8608 Bubikon

 Open the catalog to page 1
Instruction EPI 8297-2

Überdruck / Surpression/ Overpressure Nenndruck Pression nominal Nominal pressure Überdruck Surpression Overpressure Nenndruck Pression nominal Nominal pressure Überdruck Surpression Overpressure Massbilder / Cotes d'encombrement / Dimensions 38.5 (p≤2.5bar, p>250bar) 36.6 (2.5bar < p ≤250bar) Cable clamping range 6...11mm Gewinde-Bohrung Taraudage Tapped hole Gewinde-Bohrung Taraudage Tapped hole 829X.XX.XX28.XX.XX Trafag AG Industriestrasse 11 CH-8608 Bubikon We reserve the right to make alternations as technical progress may warrant. 1. Remove the female connector 2. Release the black nut...

 Open the catalog to page 2

All Trafag AG sensors & controls catalogs and technical brochures

  1. TMT502

    4  Pages

  2. Navitrag

    4  Pages

  3. Hydraulics

    24  Pages

  4. TMP301

    10  Pages

  5. TMP203

    5  Pages

  6. Shipbuilding

    16  Pages

  7. H70650a

    4  Pages

  8. H70649a

    4  Pages

  9. H70603a

    2  Pages

  10. H70600

    2  Pages

  11. H72302

    5  Pages

  12. H72304

    9  Pages

  13. H72303

    10  Pages

  14. H72207

    4  Pages

  15. H72206

    4  Pages

  16. H70694

    2  Pages

  17. H72335

    4  Pages

  18. H70697

    2  Pages

  19. H72307

    9  Pages

  20. Flyer ND 8204

    2  Pages

  21. Flyer N 8202

    2  Pages

  22. Flyer ADS 319

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.