*mydirectindustry

Catalogs
Trafag AG sensors & controls
Instruction A/AS/ASE 645/650

Instruction A/AS/ASE 645/650

Product catalog summary

Specifications:
The document outlines the specifications for various models of Ministat, Ambistat, and Galvanostat devices. It includes details on switching differences (hysteresis), sensor and protection tube mounting, and electrical connections. The electrical ratings for different switches are provided, indicating the voltage and current capacities for both AC and DC circuits.

Procedures:
Instructions are given for filling the protection tube with silicone oil to improve heat transfer, with a caution to allow for oil expansion. The document also describes the process for adjusting the switching differential using a knurled knob, with precise adjustments recommended to be made using a thermometer during operation.

Standards and Recommendations:
The document emphasizes the importance of adhering to the specified temperature ranges for sensor and storage temperatures to ensure proper device operation. It also highlights the need for precise adjustments using a thermometer and provides guidance on readjustment procedures.

Key Data from Tables:
The tables provide detailed information on the temperature ranges for various device models, including sensor temperature, storage temperature, and operating temperature. The document specifies the maximum allowable sensor temperature to prevent damage.

Critical Information:
Attention is drawn to the importance of not exceeding the maximum sensor temperature and ensuring precise adjustments for optimal device performance. The document also notes that the scales provided are for guidance only and may have slight deviations from actual values.

Catalog excerpts

Iiufua Betriebsanieitung Ministat/Ambistat/Galvanpstat sensors^>controls Instructions for all versions Massbilder / Cotes d'encombrement / Dimensions Schaltdifferenz (Hysterese) Switching difference EXAMPLE A EXAMPLE B (better) resting medium (static) EXAMPLE A EXAMPLE B (better) flowing medium (dynamic) Montage de la sonde et du doigt de gant Mounting of sensor and protection tube gefullt, ist darauf zu achten, dasssich Lorsqu'on met de I'huile silicone dans le doigt de gant pour ameliorer le transfer! de chaleur, on doit respecter When the protection tube is filled with silicone-oil for improving the heat transfer, pay attention to the Elektrische Anschlusse Raccord electrique Electrical connections Schaltleistung/ Pouvoir de coupure/ Electrical ratings Variantencode: xxx.jxx^cx... Eingang Phase Ausgang Phase zu Heizung Ausgang Phase zu Kuhlung Entree phase Sortie phase - chauffage Sortie phase - refroidissement Entry phase Exit phase - heating Exit phase - cooling Vergleichen Sie das Leistungsschild des Reglers!/ Voir sur la plaque signaletique du thermostat!/ Electrical ratings see on type plate!

Open the catalog to page 1

Temperaturen / Températures/ Temperatures Variantencode xxx.xxxx.xx... Bereich Plage [°C] Range Fühlertemperatur Température de sonde max. [°C] Sensor temperature Lagertemperatur Température de stockage [°C] Storage temperature Betriebstemperatur Température de service [°C] Operating temperature -30...70°C* *Achtung: Fühler darf die maximale Fühlertemperaur nicht überschreiten! *Important: Sonde ne doit pas dépasser le maximum de la temperature de sonde! *Important: Temperature at sensor may not exceed maximum sensortemperature! -10...70°C* -45 ... -30 ... -30 ... -30 ... -30 ... -30 ... Einstellskala/...

Open the catalog to page 2

All Trafag AG sensors & controls catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list