*mydirectindustry

Data Sheet ECON 8498

Product catalog summary

Overview
Trafag Sensors & Controls, based in Switzerland, is a leading supplier of high-quality sensors and monitoring instruments for pressure and temperature measurement. The document provides technical specifications for the ECON 8498 marine pressure transmitter, suitable for shipbuilding and engine manufacturing applications.

Applications and Features

Economical solution with good media compatibility.
EMC protection compliant with IEC 61000 standards.
Available for absolute or relative pressure measurement.

Technical Data

Measuring Principle: Thick film on ceramic.
Media Temperature: <60 bar: -25°C to +85°C; >60 bar: -10°C to +85°C.
Measuring Range: 0 to 1 bar up to 0 to 250 bar.
Output Signal: 4 to 20 mA.
Accuracy at 25°C: Typically ±0.5% FS.
Approvals: BV, DNV, GL, KRS, LRS, NKK.

Ordering Information

Pressure ranges from 0 to 1.0 bar up to 0 to 250 bar with corresponding overpressure and burst pressure values.
Pressure Connection Options: G1/4" female/male, 1/4" NPT male, 7/16"-20 UNF male/female.
Electrical Connection: Male electrical plug DIN43650-A.

Specifications

Accuracy: ±3.0% FS typ. at -25 to +85°C; ±0.5% FS typ. at 25°C.
Long-term Stability: 1 year typ. ±0.3% FS.
Environmental Conditions: Media temperature <60 bar: -25°C to 85°C; >60 bar: -10°C to 85°C.
Protection: Minimum IP65.
Vibration and Shock Resistance: 4g (10-2000 Hz) and 50g/11 ms respectively.

Mechanical Data

Sensor Material: Ceramic, Al2O3(96%).
Housing/Pressure Connection: 1.4435 (AISI316L).
Sealing Options: FKM, CR, EPDM.
Weight: Approximately 110 g.
Mounting Torque: 15 to 20 Nm.

Additional Information

Documents available for further details include data sheets, instructions, and flyers accessible via Trafag's website.

Catalog excerpts

Marine pressure transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. Shipbuilding Engine manufacturing Economical Good media compatibility EMC protection, IEC 61000 Absolute or relative pressure measurement Technical Data Measuring principle Thick film on ceramic Media temperature Measuring range Ambient temperature Output signal Trafag Sensors & Controls Switzerland www.trafag.com [email protected]

Open the catalog to page 1

ECON 8498 Ordering information/type code 8498 . XX XX XX XX XX XX Measuring range 1) Pressure measurement range [bar] 0 ... 1.0 absolute (Pressure connection: 1.4435) Pressure connection relative (Pressure connection: 1.4435) 7/16"-20UNF female, DIN3866 (Valve opener) Electrical connection Male electrical plug: DIN43650-A, Mat.: PA Load resistance O-Ring EPDM Pressure peak damping element ø 0.3 mm Pressure peak damping element ø 0.5 mm Pressure peak damping element ø 1.0 mm Female electrical connector DIN43650-A Customized pressure ranges upon request Standard products (extra short lead time)...

Open the catalog to page 2

ECON 8498 Specifications Accuracy TC zero point and span typ. Long term stability 1 year typ. Output / supply voltage Rise time Media temperature Ambient temperature Environmental Conditions Electrical Data Humidity Vibration Emission Housing / Pressure connection Male electrical plug Immunity Mechanical Data Provided female connector is mounted according to instructions Additional information Documents Data sheet Instructions Flyer

Open the catalog to page 3

Pressure connection female Cable clamping range 6...11mm Electrical connection Protection / electrical connection IP65*) Industrial standard EN175301-803A Output signal *) Provided female connector is mounted according to instructions

Open the catalog to page 4

Data Sheet ECON 8498

Data Sheet ECON 8498

Catalog excerpts

All Trafag AG sensors & controls catalogs and technical brochures