Rugged Lightweight Easy to use High benefit-cost ratio Superb axial Homogeneity High stability Software Modern design On the right TRAQC with Tradinco Quality Calibrators The use of model TRAQC-3 LL offers a number of great advantages above alternative methods of temperature calibration. The TRAQC-3 LL dry block calibrator is a high precision Laboratory temperature calibrator ranging from -30°C up to 150°C. This instrument is equipped with a special patented Heat / Cooling section which creates a superb axial homogeneity. This ensures an accurate and stable Temperature calibration. Tradinco Instruments distributes, designs, manufactures and repairs calibration, sensing equipment and instruments for various industries. Our core values are quality, service and keeping our knowledge up to date with the latest technical innovations. Up to two inserts, insert puller and insulating tube can be stored inside the housing of the TRAQC-3 LL calibrator. Full automatic temperature calibration is possible in conjunction with our Autocal® calibration software. This combination saves time and reduces the uncertainty level significantly. Traqc-3 LL Rev03 8-2016 Tradinco Instruments | Radonstraat 250 | 2718 TB | Zoetermeer | The Netherlands T +31 792033133 | F +31 792033139 | [email protected] |

Traqc-3 LL Technical Specifications General Display Resolution Switch test Interface Supply voltage Power consumption Fault protection Fuse Thermal Protection switch Safety Conformity EMC Well depth Well diameter Weight Dimensions (LxWxH) Dual digit led display (Upper 10mm, Lower 8mm) 4 digits, 0.1 °C/°F Powerless switch, LED indicator, 5VDC, 16mA max. RS232 for use with AutoCal Software 230VAC, 50/60 Hz 300 Watts Internal sensor break detection 2x 3.15A antisurge, 230 VAC 167°C NEN-EN-IEC 61010-1. NEN-EN-IEC 61000-4-3, -3-2, -3-3, -4-2, -4-4, -4-5 Max. 145 mm, recommended 135mm. Max. Ø25mm 11.5...