technical data sheet Electronic dynamometer with removable display unit W.L.L. : 0.5 to 10 t Description Range of precision electronic dynamometers appliances with removable display unit. The radio connection (2.4 G.Hertz) with 80 m in open field, working range is permanent between the unit and removable display unit. The specific, patented shape of the attaching head enables either standard shackles or standardised accessories for chains. The dynamometers of this range function in all positions for the measurement of force and suspended for weighing purposes. The LLX 2 is available in two versions: Standard version with interlinking anchoring rings in the perpendicular surfaces, or an optional version with the anchoring rings both on the same side. The standard version enables articulation of lifting accessories on both sides, thus avoiding stresses due to load movements and enhancing appliance precision. These assemblies are put together in our production line and cannot be modified later by the user. Operating Principle Strain gauge measurement of the extension, within its limits of elasticity, of a metal body subjected to traction stress. The sensor generates an electrical signal that is proportional to the load. This signal is processed by a micro-processor analyser and then transmitted via radio waves to the display unit, which immediately displays the load applied to the sensor to which it is linked. The display unit is compatible with all of the LLX 2 model sensors, irrespective of their capacity. Technical Specisfications: Precision: 0.1 % (ISO 376 . 21 °C) Coefficient safety: minimum 4 Power supply: 3 x 1.5 V "AA" batteries. Removable Display 1 x LI ONE battery (delivered with charger) The standard version of the equipment comes with batteries and power pack in a carrying case. Protection : IP 66, NEMA 4 (sensor) More details are available on page 2. Optional Accessories PC connection Kit Chain accessories with rapid connection Connecting shackles I.P. 67 Protection Provisions applied : Machine Directives : 98/37/CEE European Standards : EN 12100-1 and 12100-2 CEM Directive : 89/336/CEE Electrical Safety : IEC 61010-1 2de Edition 2001 Radio certifications : CE :Radio test EN 300 440-2 V1.1.1 / USA & Canada : FCC part 15 / Australia : C-Tick ID R&TTE Directive (1999/5/CE)

technical data sheet Electronic dynamometer with removable display unit W.L.L. : 0.5 to 10 t Display Unit Maximum capacity Test load Safety coefficient Precision Number height Autonomy Radio scope From 300 to 1000 h depending of functions m Head Material Sensor Material