Vision on quality www.tqc.eu FILM THICKNESS GAUGE SP1570 PRODUCT DESCRIPTION High precision film thickness gauge, especially developed for measuring so-called "replica tapes" as Testex®, used mainly to measure the surface profile. STANDARDS ISO 8503-5. SCOPE OF SUPPLY Delivered in hard case The large clear display makes it easy to read the measurement under all conditions. Values can be displayed in either microns or inches. To minimize the influence of body/hand temperature the gauge is mounted detached from the holder. The TQC film thickness gauge operates completely according to "ISO 8503-5 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - part 5: Replica tape method for the determination of the surface profile." As described in this standard the closing force is 1,5 N. the gauge has to have an accuracy of 5 micron and a resolution of 1 micron. SP1570 Film Thickness Gauge • Film thickness gauge, range: 0-1000 Micron TQCB.V. 2908 LL Capelle aan den IJssel phone:+31 (0)10-7900100 e-mail: [email protected]

• Always clean the instrument after use. • Always keep the instrument in its case when not in use. • We recommend annual calibration. The right of technical modifications is reserved. The information given in this sheet is not intended to be exhaustive and any person using the product for any purpose other than that specifically recommended in this sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk. Whilst we endeavour to ensure that all advice we give about the product (whether in this sheet or otherwise)...