Vision on quality www.tqc.eu ADHESION TESTER POSITEST AT LD9330, LD9331, LD9332, LD9333 PRODUCT DESCRIPTION The new PosiTest Adhesion Tester measures adhesion substrates. There is a manual and an automatic model available. Both models have a hydraulic pump. The pump of the automatic version is electronically controlled and applies smooth and continuous pull-off pressure. This greatly reduces user effort and the risk of influencing the accurate measurements on smooth or uneven surfaces The internal memory of the Manual version stores maximum pull-off pressure, rate of pull, test duration and dolly size for up to 200 pulls. The automatic version stores maximum pull-off pressure, rate of pull, test duration, dolly size, pass/fail, nature of fracture and user notes for 100,000 pulls in up to 1,000 batches in its internal memory and pull rate, pull limit and hold time are user-adjustable with the impact and scratch resistant color touch screen with keypad for operation with or without gloves. Every PosiTest Adhesion Tester pressure system is calibrated and certified to ± 1% accuracy using a NIST traceable load cel. Evaluating measured values on PC is possible by using an adapter and PC-software. STANDARDS Conforms to international standards including ASTM D4541/D7234, ISO 4624/16276-1, AS/NZS 1580.408.5 and others. Look up the appropriate standard for a correct execution of the test. FEATURES • Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces • Internal memory • Compatible with PosiSoft desktop software • Environmentally sealed enclosure - weatherproof, dustproof and shockproof - meets or exceeds IP65 SCOPE OF SUPPLY Positest Adhesion Tester -Manual • LD9332: 20 mm dollies (20), 20 mm cutting tool and 20 mm stand off LD9333: 50 mm dollies (8), 50 mm cutting tool and 50 mm stand off • Manual Adhesion Tester, • built-in rechargeable NiMH battery with charger • abrasive pad • glue with mixing sticks and palettes Positest Adhesion Tester-Automatic • LD9330: 20 mm dollies (20), 20 mm cutting tool and 20 mm stand off LD9331: 50 mm dollies (8), 50 mm cutting tool and 50 mm stand off • Automatic Adhesion Tester • built-in rechargeable NiMH battery with charger • abrasive pad • glue with mixing sticks and palettes TQCB.V. 2908 LL Capelle aan den IJssel phone:+31 (0)10-7900100 e-mail: [email protected]

Vision on quality www.tqc.eu • cotton swabs • USB cable • PosiSoft Software • instruction booklet and video • Certificate of Calibration traceable to NIST • two-year warranty • sturdy, lightweight carrying case • cotton swabs • USB cable • PosiSoft Software • instruction booklet and video • Certificate of Calibration traceable to NIST • two-year warranty • sturdy, lightweight carrying case LD9332 Defelsko Positest ATM20 Manual Adhesion tester with 20 mm dollies LD9333 Defelsko Positest ATM50 Manual Adhesion tester with 50 mm dollies LD9330 Defelsko Positest ATA20...

Vision on quality www.tqc.eu USE With this method, a loading fixture commonly called a dolly or stud supplied as smooth steel or aluminium must be cleaned before it is glued with epoxy or acrylic adhesives to the surface. The coating surface must also be cleaned. Roughen the bonding surface of the dolly either with sandpaper or light abrasive blasting. The adhesive must cure for the amount of time recommended by the manufacturer. This can be several hours to a day, depending on the adhesive and the temperature. A critical step in the test procedure is positioning the dolly onto the surface. Avoid...