TPS-AWD1023S SeriesAC / DC Module Power SupplyProduct Characteristics • Input voltage: 85-305 VAC / 100-430 VDC • Full-load efficiency: 85% (typical) • Output short circuit, overcurrent protection function, small volume, high efficiency, low power consumption, environmental protection. • The design conforms to the I EC / EN 61558 and I EC / EN60335 standards

TPS-AWD1023S SeriesAC / DC Module Power SupplyGeneral features Item Product characteristics curve Input voltage derating curve

TPS-AWD1023S SeriesAC / DC Module Power SupplyTypical characteristic curves Typical circuit design and application Peripheral circuit design scheme ( Figure 1) Reference table for the selection of peripheral devices Output voltage 1. FUSE, MOV and NTC can be selected according to the actual application requirements, 2. D1 is a TVS tube, which can protect the rear stage circuit when the module is abnormal. It is recommended to select 1.2 times of the output voltage. EMC Solution--Recommended circuit EMC Solution-Recommended Circuit (Figure 2)

TPS-AWD1023S SeriesAC / DC Module Power Supply Appearance size, recommended PCB printing layout Mechanical dimensions Bottom view Size of terminal diameter tolerance: ±0.1 [±0.004] End of dimension tolerance: ±0.5 [±0.020] • The input voltage shall not exceed the specified range value, otherwise it may cause permanent and unrecoverable damage; • If the productworks below the minimum required load, it cannot be guaranteed that the product performance meets all the performance indicators in this manual; • The maximum capacitive load is tested in the input voltage range and under full load conditions;...