TPS-Elektronik GmbH * Senefelderstrasse 8 * 41066 Monchengladbach www.tps-elektronik.de * [email protected] Manufacturer: Shenzhen Huayiteng Technology Development Co., Ltd. Material name: charger Technical data model: HYT-1500360E This specification is used to specify the electrical and mechanical properties of the charger, as well as external environmental requirements and other specifications. Working temperature Working humidity Detection temperature Storage temperature Storage humidity Atmospheric pressure Nominal voltage range: Permissible voltage range: Permissible AC input frequency range 47 ~ 63 Hz When the AC input voltage is 100V-240V AC, 50 / 60HZ, the maximum input current should be less than 0.4A

TPS-Elektronik GmbH * Senefelderstrasse 8 * 41066 Monchengladbach www.tps-elektronik.de * [email protected] In the event of a cold start, the maximum surge current is less than 50 A if the voltage AC 100 V - 240 V, 50 / 60HZ is entered within 10 ms The input voltage is in the range of AC 100 V - 240 V. When the CV mode is 14 VDC, the maximum output current range is 320-400 mAdc, work efficiency > 70%. When AC 100 V - 240 V is entered, the standby power with no load is 0.5 W or less. 4.2 Output characteristics When using the constant current mode 14 V, test output current range 320mA-400mA...

TPS-Elektronik GmbH * Senefelderstrasse 8 * 41066 Mönchengladbach www.tps-elektronik.de * [email protected] 4.3 Protective function 4.3.1 Short-circuit protection: It is guaranteed that this product will not cause fire or damage if the output terminal is short-circuited. When the load increases and the output current is greater than the rated current value, the output voltage will decrease rapidly as the output current increases. 5 performance test 6.1 Vibration test The frequency is 10-55 Hz, the amplitude is 0.35 mm, and it is vibrated cyclically for 5 cycles in each direction of the...

TPS-Elektronik GmbH * Senefelderstrasse 8 * 41066 Monchengladbach www.tps-elektronik.de * [email protected] 3.0 kV, 50 Hz, 1 minute: After direct addition, increase from 1.5 kV to 3.0 kV at a steady rate. The requirements: The leakage is less than 5 mA and there is no breakdown. Add 100 VAC / 60 Hz to the input terminal and test between the output terminal and ground. The requirements: The leakage current is less than 0.25 mA. Environment temperature 30 - 50 ° C Humidity 5% - 93% Fulfill the requirements of GB9254-2008 (idt CISPR22: 1997) of class B according to GB17625.1-2003 (corresponds...

TPS-Elektronik GmbH * Senefelderstrasse 8 * 41066 Mönchengladbach www.tps-elektronik.de * [email protected] The shell of this product is black, the surface is flat, there are no scratches, burrs, mechanical damage, and the exposed metal parts should not be rusted. The plug and connection are reliable and there is no loosening or chipping. 10.2 Output requirements: 2464 24 # B prefix L = 1.5M

TPS-Elektronik GmbH * Senefelderstrasse 8 * 41066 Mönchengladbach www.tps-elektronik.de * [email protected] Note: The output connector is the B prefix output port (Note: the DC output is the B prefix output port).