TECHNICAL DATASHEET FSP090-AxxN3 Series FEATURES • Certified IEC 62368-1 & CB 60950-1 • Meet Energy Efficiency DOE Level VI • Meet Code of Conduct Version 5 Tier 2 • High Reliability • Over Current Protection • Over Temperature Protection • Over Voltage Protection This product is a 90 watts AC to DC adapter intended for use in IPC systems, embedded systems, printers, monitors, POS systems and PoE application, that have a high wattage demands. This adapter operates at 90 to 264 VAC input voltage. The unit meets CISPR32 EN55032 CLASS B, EN55024 and FCC PART 15B Class B emission limits, and is designed for ITE application. INPUT SPECIFICATIONS Input voltage: 90-264 VAC Input current: 100Vac, 240Vac / full load ^ 1.2A No load power consumption 115Vac , 230Vac ^ 0.5W INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS Output voltage/current: Total output power: Protection: Over voltage: Short circuit & Over current: Over temperature: The adapter will enter into shut down that means no output while over voltage happened at output terminal that caused by internal fault, the output trip voltage shall not exceed 29/35/60/65* volts. That will be return to normal state by AC reset. When an internal fault occurs, or an external fault is applied to the power supply, such that an overload or short circuit is applied to the output, the power supply shall shut down and enter auto-recovery mode. The power supply will enter into shut down while the abnormal thermal rise occurs. That will be return to normal state by AC reset. Power factor: 115Vac, 230Vac / full load ^ 0.9 Provisions for adding harmonic reduction per EN 61000-3-2 must be present. Efficiency: See rating chart Power turn-on time At 100Vac / full load, output voltage shall remain Hold-up time: regulation ^ 3Sec At 100Vac or 240Vac / full load, output voltage shall Inrush current: remain regulation ^10ms 100Vac, 240Vac / full load , Shall be less than the rating of adapter critical component (including rectifiers, fuse Operating altitude: surge and current limiting device) Withstand voltage: 5000 meters above sea level Between AC input and secondary applied DC 4242V,test MTBF: time 1 minute,cut off current shall be less than 10mA 100Vac, 240Vac / full load , 300,000 hours at 25°C, Environment Working TEMP. Storage TEMP. Working Humidity Storage Humidity Power de-rating: Class B conducted, class B radiated Class B conducted, class B radiated Class B conducted, class B radiated Meet class D Meet regulation Air discharge: ±15 KV,contact discharge: ±8KV, meet criterion A 80 ~1000 MHz,3V/m,80% AM(1kHz), meet criterion A Impulse: ±1kV applied to L,N,meet criterion A ±1kV applied differential mode, ±2kV applied common mode,meet criterion A 0.15 ~ 80 MHz,3Vrms,80% AM(1kHz),meet criterion A 50 Hz or 60Hz,1A/m,meet criterion A Voltage Dips : >95% reduction for 0.5 period,meet criterion B 30% reduction for 25 period,meet criterion C Voltage Interruptions : >95% reduction for 250 period,meet criterion C 100Vac or 240Vac, 0C to 40C, 100% load, 50C, 85% load, 60C, 70% load, 70C, 55% load (Shall be less than the rating of adapter critical component , follow FSP specification (adapter)) © 2018 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners. 2018.12 spec

TECHNICAL DATASHEET OUTPUT POWER DERATING CURVE % Output Power INPUT VOLTAGE DERATING CURVE OUTPUT VOLTAGE/CURRENT RATING CHART Efficiency Output Voltage Output Current Over Voltage Protection © 2018 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners. 2018.12 spec

TECHNICAL DATASHEET MECHANICAL SPECIFICATIONS © 2018 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners. 2018.12 spec

TECHNICAL DATASHEET CONNECTOR SPECIFICATIONS © 2018 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners. 2018.12 spec