■ Wide AC supply voltage range: 100...264 V (1500W models), with active PFC ■ Output power ratings: 0...1500 W or 0...3000 W ■ Flexible, power regulated output stage ■ Various protection circuits (OVP, OCP, OPP, OTP) ■ Control panel with pushbuttons and blue LCD for actual values, set values, status and alarms ■ Share bus for support of parallel connection ■ Galvanically isolated analog and digital (USB, Ethernet) interfaces ■ Very low height of only 1U Temperature-controlled fans for cooling ■ SCPI command set and ModBus RTU support ■ LabView VIs and control software for Windows The microprocessor-controlled laboratory power supplies of series EA-PS 9000 1U offer many functions and features in their standard version, making the use of this equipment remarkably easy and most effective. All this comes in a flat design with only 44 mm (1.75") of height. The clearly arranged control panel features two rotary knobs, six pushbuttons and two LEDs. Together with an illuminated, blue LCD display for all values and status it simplifies the use of the device. All units are provided with an active Power Factor Correction circuit and models up to 1.5 kW are even suitable for a worldwide operation on a supply from 100 VAC up to 264 VAC. Both power classes reduce the output power automatically when the input supply is low, so the 1.5 kW models can still provide 1 kW power with an input supply of 100...150 VAC and the 3 kW models can still provide 2.5 kW at 180...207 VAC. DC output voltages between 0...80 V and 0...750 V, output currents between 0...6 A and 0...100 A and output power ratings of 0...1500 W or 0...3000 W are available. Current, voltage and power can thus be adjusted continuously between 0% and 100%, no matter if manually or remotely controlled (analog or digital).The DC output is located on the rear panel of the devices. © EA Elektro-Automatik, 2018 Subject to modification without notice, errors and omissions except

Programmable laboratory DC Power supplies Power All models are equipped with a flexible autoranging output stage which provides a higher output voltage at lower output current, or a higher output current at lower output voltage, always limited to the adjustable power set value or the rated power. Therefore, a wide range of applications can already be covered by the use of just one unit. Models with a nominal output voltage of 200 V or higher include a discharge circuit for the output capacities. For no load or low load situations, it ensures that the dangerous output voltage can sink to under...

Programmable laboratory DC Power supplies (2 Standard version, models with options may vary (3 Enclosure of the standard version and not overall size, versions with options may vary © EA Elektro-Automatik, 2018 Subject to modification without notice, errors and omissions excepted

Programmable laboratory DC Power supplies EA-PS 9000 1U 1500 W & 3000 W Product views Digital interfaces (USB, Ethernet) Galvanically isolated analog interface Connector for remote sensing and Share bus D E F View from the right side View from the left side, with DC cover © EA Elektro-Automatik, 2018 Subject to modification without notice, errors and omissions excepted