*mydirectindustry

STAND-UP RIDER

Product catalog summary

Battery Compartment and Power System:
The document outlines the specifications for battery compartments across various models, detailing dimensions in both inches and millimeters. All models utilize lead-acid batteries with a voltage capacity of 36 V, and amp-hour ratings vary. Specific dimensions for width, length, and height are provided.

Tires and Lifting:
Models are equipped with solid rubber or polyurethane tires and feature dual steer capabilities. Lifting specifications include consistent dimensions for both front (drive) and rear (steer) tires across models.

Motors and Control Systems:
The power system comprises 4-pole induction AC 3-phase motors for both driving and load handling, with a horsepower of 7.0 (5.2 kW) for driving and 14.1 (10.5 kW) for load handling. Control systems include transistor-MOSFET for driving and load handling, with contactor-based power steering.

Truck Weights and Load Capacities:
Detailed truck weights without batteries are provided, along with load capacities ranging from 3,000 to 5,000 lbs, depending on the model and configuration.

Exterior Dimensions and Performance:
Exterior dimensions cover maximum fork height, mast lowered and extended heights, and various chassis measurements. Performance data includes travel speeds, lifting and lowering speeds, and gradeability percentages.

General Specifications:
All models are stand-up rider trucks powered by batteries. The document includes detailed specifications for mast types, fork sizes, and turning radii, offering comprehensive data on operational and performance characteristics.

Mast Specifications Overview:
The document details specifications for various mast types used in forklifts, specifically the SR1-BEF and SR1-BET series. It includes measurements for maximum fork height, overall height, free lift, and tilt range, divided by battery compartment sizes and mast types, such as the Wide Visible Full-Free Lift Two-Stage Mast (FV) and the Open View Full-Free Lift Three-Stage Mast (FSV).

Key Specifications:

Maximum Fork Height: Ranges from 71 inches (1803 mm) to 227 inches (5766 mm) depending on the model and configuration.
Overall Height (Lowered/Extended): Varies from 55 inches (1397 mm) to 275 inches (6985 mm).
Free Lift: Measurements range from 31 inches (785 mm) to 72 inches (1826 mm).
Tilt Range: Forward tilt is 3 degrees and backward tilt is 5 degrees across all models.
Load Capacity: Load capacities are specified at a 24-inch (600 mm) load center, with variations based on the presence of a load backrest.

Additional Notes:

Dimensions may need adjustments if hoses or quick disconnects extend above the carriage.
The standard load backrest height is 48 inches (1219 mm).

Support and Service:
Toyota 360 Support offers a comprehensive dealer network with certified technicians for maintenance and warehouse needs assessment, ensuring optimal equipment performance and minimal downtime.

Disclaimer:
Some features are optional, and specifications may change without notice. Consult your dealer for the most accurate and up-to-date information.

Catalog excerpts

ELECTRIC MOTOR RIDERS

Open the catalog to page 1

STAND-UP RIDER LOAD CENTER MAXIMUM FORK HEIGHT Food Storage General Warehousing Cold Storage Food Processing General Manufacturing STANDARD FEATURES PERFORMANCE • 36 Volt Electrical System • AC Induction Drive Motor • Transistor Control System with MOSFET • AC Induction Hydraulic Motor1 • Independent Lift & Steer Motors • Dual Rubber Steer Tires2 • Dual Polyurethane Steer Tires (18.5” and 21.25” BC)1 • Low Durometer Smooth Rubber Drive Tires • Multifunction Digital Display • UL “E” Construction • Mast Tilt (3° fwd / 5° bwd) • Programmable Performance Parameters • Power Hook-Up for Onboard Terminal,...

Open the catalog to page 2

OPTIONAL EQUIPMENT LOAD HANDLING • Full-Free Lift Two-Stage Mast (FV) • Full-Free Lift Three-Stage Mast (FSV)2 • Full-Free Lift Three-Stage Mast (FSW)1 • Full-Free Lift Four-Stage Mast (QFV)1 • Mast Tilt, (5° fwd / 3° bwd) • Fixed Carriage (removes sideshift) • Battery Gate Interlock • Hydraulic Quick Disconnects (Single)1 • Hydraulic Quick Disconnects (Dual)1 LOAD HANDLING (HOSE & VALVE ASSEMBLY) w/ SIDESHIFT • Integral Sideshift (Lift-Tek) with 1 Auxiliary Function (Internal Reeving) • Integral Sideshifting Fork Positioner1 LOAD HANDLING (HOSE & VALVE ASSEMBLY) w/out SIDESHIFT • 1 Auxiliary...

Open the catalog to page 3

STAND-UP RIDER TRUCK SPECIFICATIONS MODEL NUMBERS GENERAL DATA Load Capacity Load Center Battery Compartment Size Power Type Operator Position Maximum Fork Height (MFH) Free Lift Tilt Range (forward / backward) Mast Lowered Height Mast Extended Height Battery Roller Height Load Backrest Height Overhead Guard Height2 Chassis Height Chassis Width Wheelbase Load Distance1 Length to Fork Face1 Underclearance Overall Width Fork Size Fork Spread (outer edge to edge) Outside Turning Radius LxTxW Maximum / Maximum Basic Right Angle Stacking Aisle Width1 Carriage Width Step Height PERFORMANCE DATA Maximum...

Open the catalog to page 4

MODEL NUMBERS GENERAL DATA Load Capacity Load Center Battery Compartment Size Power Type Operator Position Maximum Fork Height (MFH) Free Lift Tilt Range (forward / backward) Mast Lowered Height Mast Extended Height Battery Roller Height Load Backrest Height Overhead Guard Height2 Chassis Height Chassis Width Wheelbase Load Distance1 Length to Fork Face1 Underclearance Overall Width Fork Size Fork Spread (outer edge to edge) Outside Turning Radius LxTxW Maximum / Maximum Basic Right Angle Stacking Aisle Width1 Carriage Width Step Height PERFORMANCE DATA Maximum Travel (fwd. / rev.) Speeds Lifting...

Open the catalog to page 5

Open the catalog to page 6

Open the catalog to page 7

Open the catalog to page 8

MODEL NUMBERS GENERAL DATA Load Capacity Load Center Battery Compartment Size Power Type Operator Position Maximum Fork Height (MFH) Free Lift Tilt Range (forward / backward) Mast Lowered Height Mast Extended Height Battery Roller Height Load Backrest Height Overhead Guard Height2 Chassis Height Chassis Width Wheelbase Load Distance1 Length to Fork Face1 Underclearance Overall Width Fork Size Fork Spread (outer edge to edge) Outside Turning Radius LxTxW Maximum / Maximum Basic Right Angle Stacking Aisle Width1 Carriage Width Step Height Lifting Lowering Gradeability Grade Clearance Full Load...

Open the catalog to page 9