Catalogs >
Toyota Industrial Equipment >
LARGE IC CUSHION

LARGE IC CUSHION
12Pages

Catalog excerpts

INTERNAL COMBUSTION ENGINE CUSHION TIRE

STANDARD FEATURES DURABILITY • Control Area Network (CAN-bus) communication • Fully stamped steel side panels • Full-floating front axle • Moisture-resistant electric connectors • High cooling capacity radiator • Low-maintenance battery • Large-capacity engine-cooling fan • 8" cyclone air cleaner • Plate-iron front fenders • Anti-restart ignition key switch • Stamped steel engine hood • External hydraulic oil cooler • Halogen headlights • System of Active Stability™ (SAS) • Key lowering interlock • Neutral start safety switch • Operator Presence Sensing System (OPSS) • Electric...

Open the catalog to page 2

OPTIONAL EQUIPMENT • Multifunction digital display with selfdiagnostics & engine protection system • Hydraulic accumulator • Intelli-Shift • Mini-lever controls with ErgoShift • Synchronized steering • Combination brake & inching pedal • EZ Pedal (foot directional control) • Steering wheel with knob • Front combination lights • High-mount rear combination lights • Strobe lights • LED front headlights • LED rear combination lights • LED rear work light • LED reverse-activated rear work light • Cloth 4-way adjustable full-suspension seat • Swivel seat • Orange seatbelt • Box fin radiator •...

Open the catalog to page 3

MODEL NUMBERS TRUCK SPECIFICATIONS GENERAL DATA 8FGC35U 8FGC45U 8FGC55U Power Type LPG LPG LPG Operator Position Seated Rider Seated Rider Seated Rider Computed values. Performance of LPG fuel system may be less than performance of standard model shown. Values taken at Hydraulic Control Valve. Does not take in to consideration losses through mast plumbing (hosing, fittings, QDs, etc.).

Open the catalog to page 4

Load Capacity lb (kg) 13500 (6000) 15500 (7000) Power Type LPG LPG A Maximum Fork Height (top of forks) in (mm) C Fork Size (T x W x L) in (mm) D Fork Spread Max. / Min. (outer edge to edge) in (mm) E Tilt Range (forward / backward) deg F Length to Fork Face in (mm) H Mast Lowered Height in (mm) I Mast Extended Height (top of load backrest) in (mm) J Overhead Guard Height in (mm) K Turning Radius (inside / outside) in (mm) M Basic Right-Angle Stacking Aisle Width in (mm) Operator Position Seated...

Open the catalog to page 5

EXTERIOR DIMENSIONS

Open the catalog to page 6

1 Height of standard load backrest is 48" (1220 mm). 2 238 FSV requires wide tread.

Open the catalog to page 8

OVERALL HEIGHT LOWERED MAST TYPE MAXIMUM FORK HEIGHT (TOP OF FORKS) WITHOUT LOAD BACKREST WITH STANDARD LOAD BACKREST WITHOUT LOAD BACKREST WITH STANDARD LOAD BACKREST 1 TILT RANGE LOAD CAPACITY AT 24 IN. (610 MM) LOAD CENTER WIDE TREAD OVERALL HEIGHT LOWERED MAST TYPE MAXIMUM FORK HEIGHT (TOP OF FORKS) WITHOUT LOAD BACKREST WITH STANDARD LOAD BACKREST WITHOUT LOAD BACKREST WITH STANDARD LOAD BACKREST 1 TILT RANGE LOAD CAPACITY AT 24 IN. (610 MM) LOAD CENTER WIDE TREAD 1 Height of standard load backrest is 54” (1370 mm).

Open the catalog to page 9

MAST SPECIFICATIONS OVERALL HEIGHT LOWERED MAST TYPE MAXIMUM FORK HEIGHT (TOP OF FORKS) WITHOUT LOAD BACKREST WITH STANDARD LOAD BACKREST WITHOUT LOAD BACKREST WITH STANDARD LOAD BACKREST 1 TILT RANGE LOAD CAPACITY AT 24 IN. (610 MM) LOAD CENTER WIDE TREAD 1 Height of standard load backrest is 54" (1370 mm).

Open the catalog to page 10

Some product features described herein are optional. Please consult your dealer for specifications. Details of specifications and equipment are based on information available at time of printing and may change without notice. ®TOYOTAINDUSTRIAL EQUIPMENTREACH NEW HEIGHTS 007228FGC3570SS ©2016 Toyota Material Handling, U.S.A., Inc.

Open the catalog to page 12