Catalogs >
Toyota Industrial Equipment >
HIGH-CAPACITY IC CUSHION

HIGH-CAPACITY IC CUSHION
12Pages

Catalog excerpts

INTERNAL COMBUSTION ENGINE CUSHION TIRE

STANDARD FEATURES DURABILITY • Large drum-type brakes • Heavy duty planetary drive axle rated for durability in high-capacity applications • Rigidly constructed, welded frame Built-in engine protection system Heavy duty extruded and rolled mast rails Class V ITA carriage with six roller support and side thrust rollers 12 volt electrical system 2 stage wide visible mast (V) Hook-type forks SAFETY • Electrical horn • Operator Restraint System seat • Operator Presence Sensing System (OPSS) • Asbestos free components • Orange forks • Neutral safety switch • Spring-applied/hydraulic...

Open the catalog to page 2

TRUCK SPECIFICATIONS MODEL NUMBERS GENERAL DATA Load Capacity Load Center Power Type Tread Width Underclearance (full load) Q Minimum with Load Service (foot) / Parking POWER SYSTEM Make / Model Internal Combustion Engine POWERSHIFT (Autoshift) POWERSHIFT (Autoshift) Speeds (forward / reverse) Auxiliary Hydraulic Function Specifications (for attachments)4 * Computed values 1 Measured with standard forks 2 Centerline of front axle to front face of forks 3 Add load length and clearance 4 Values taken at hydraulic control valve. Does not take into consideration losses through mast plumbing...

Open the catalog to page 4

MODEL NUMBERS A Maximum Fork Height (top of forks) in (mm) B Free Lift (top of forks) in (mm) C Fork Size (T x W x L) in (mm) D Fork Spread Max. / Min. (outer edge to edge)1 in (mm) E Tilt Range (forward / backward) deg F Length to Fork Face in (mm) H Mast Lowered Height in (mm) I Mast Extended Height (top of load backrest) in (mm) J Overhead Guard Height in (mm) K Turning Radius (outside) in (mm) M Basic Right-Angle Stacking Aisle Width3 in (mm) Tread Width Underclearance (full load) Q Minimum with Load...

Open the catalog to page 5

fTSDR required to determine capacity to maximum fork height

Open the catalog to page 8

fTSDR required to determine capacity to maximum fork height

Open the catalog to page 9

fTSDR required to determine capacity to maximum fork height

Open the catalog to page 10

Grayscale Image

Open the catalog to page 11

Some product features described herein are optional. Please consult your dealer for specifications. Details of specifications and equipment are based on information available at time of printing and may change without notice. <&>TOYOTAINDUSTRIAL EQUIPMENT00722THDC1800SS©2017 Toyota Material Handling, U.S.A., Inc.

Open the catalog to page 12