Model TF-50F
1 / 4 PagesView full catalog
Model TF-50F
Product catalog summary
Application
This document describes the Strograph T, Model TF-50F, designed for performing tensile tests on specimens with large elongation under varying temperature conditions using a dedicated temperature chamber. The design includes a large crosshead stroke facilitated by incorporating a screw and crosshead within the chamber.
This document describes the Strograph T, Model TF-50F, designed for performing tensile tests on specimens with large elongation under varying temperature conditions using a dedicated temperature chamber. The design includes a large crosshead stroke facilitated by incorporating a screw and crosshead within the chamber.
Specifications
- Model: TF-50F
- Cross-head Speed: 22 steps ranging from 0.0005 to 500 mm/min with an accuracy of ±0.1%
- Cross-head Stroke: 900 mm
- Effective Stroke: 600 mm
- Lead Screw Span: 250 mm
- Load Cell Capacity: 10 kN with force accuracy of ±1%
- Load Range: Range-less (x1 to x100 equivalent)
- Interface: RS-232C
- Cooling System: Water cooling type refrigerator
- Temperature Range: -50ºC to 200ºC
- Power Requirement: Three-phase, AC200V, 50Hz or 60Hz, 3.5kVA for the main unit
- Dimensions: W1270 x D1000 x H2200 mm
- Weight: Approx. 720 kg
Options
- Manual clamp type wedge chucks with capacities of 10kN, 5kN, and 1kN for tensile testing
- Cage type bending tools with capacities of 5kN and 500N for flexural testing according to JIS and ASTM standards
- Data processing unit and software
- Non-contact type extensometer
Additional Information
Specifications are subject to change without notice. For further details, contact Toyo Seiki Seisaku-sho, Ltd. at their Tokyo office.
Specifications are subject to change without notice. For further details, contact Toyo Seiki Seisaku-sho, Ltd. at their Tokyo office.
See more
Catalog excerpts
Toyo Seiki Seisaku-sho, Ltd. 5-15-4, Takinogawa, Kita-ku, Tokyo 114-8557, Japan Note: Non-contact type extensometer and data processing unit shown is option. ■APPLICATION This Strograph T perform tensile test for specimen having large elongation under high or low temperature condition by its exclusive temperature chamber. It is so designed as to have a large crosshead stroke by incorporating screw and crosshead within chamber.
Open the catalog to page 1
Specifications are subject to change without notice. TOYO SEIKI SEISAKU-SHO, LTD. 5-15-4, Takinogawa, Kita-ku, Tokyo 114-8557, Japan Tel:+81-3-3916-8183 Fax:+81-3-3916-8173 www.toyoseiki.co.jp 20200720 MN
Open the catalog to page 4All Toyoseiki catalogs and technical brochures
107 | Compression Tester2 Pages
Related Searches
- Cutting system
- Industrial press
- Kiln
- Test machine
- Chamber kiln
- Heat treatment kiln
- Measuring machine
- Automated testing machine
- Material test machine
- Indentation hardness tester
- Plastic cutting machine
- Portable tester
- Automatic press
- Compression testing machine
- Digital tester
- Table-mounted hardness tester
- Vertical testing machine
- Automatic tester
- In-line mixer
- Screw extruder
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.