Pneumatic cylinder Type B

Product catalog summary

Overview: This document provides technical specifications and data for Type B double-acting pneumatic cylinders with linear ball guides. These cylinders are designed to handle stress from all sides and can be equipped with end position cushioning.

Specifications:

Design Type: Pneumatic cylinder with linear ball guide
Stroke Lengths: 10, 25, 50, 80, 100, 125, 160, 200 mm
Fitting Position: Any, provided the extended position is possible
Temperature Range: -10 to +70°C
Medium: Filtered, oiled or non-oiled compressed-air (min. fineness 40 µm)
Compressed-Air Supply: Front, lateral, or combi-type (8 mm only front type)
Compressed-Air Pressure: Min. 2 bar, Max. 6 bar
Materials: Various materials including aluminum for the base body and 100 Cr 6 for guides

Dimensions and Weights:

Detailed dimensions are provided for piston and piston rod diameters, along with various lengths and depths for different cylinder sizes.
Weights are specified for each stroke length and cylinder size, ranging from 100 grams for the smallest to 4640 grams for the largest.

Admissible Stress:

Longitudinal, lateral, and transverse torques are specified for different stroke lengths and cylinder types.
Correction factors are provided for calculating admissible stress based on stroke length and type.

Example Calculation:

An example is provided for calculating the required force for a 25-B cylinder with an 80 mm stroke length, using given torque and correction factors.

Catalog excerpts

Pneumatic cylinder Type B double-acting Linear ball guide 0 8/10/16/20 25/32/40 mm The guides consist of hardened and ground steel rods provided with linear cages for balls, which allows to apply stress on all sides. These pneumatic cylinders can also be supplied with end position cushioning (see order data). Technical data: Edition 2003 Subject to modifications

Open the catalog to page 1

Edition 2003 Subject to modifications

Open the catalog to page 2

Pneumatic cylinder Admissible stress Lateral torque Longitudinal torqueTransverse torque No. 1.2.1.3

Open the catalog to page 3

Pneumatic cylinderAdmissible stress Stroke length [mm]

Open the catalog to page 4

Given qty: 25 - B with a stroke length of 80 mm Lever arm Li = 40 mm = 0,04 m Longitudinal torque Mi = 6,7 Nm Correction factor A = 102,4 mm = 0,1024 m = 47 All data based on tests conducted by TOSS.

Open the catalog to page 5

All TOSS GmbH & Co. KG catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list