Adjustment units Type SEK

Product catalog summary

Overview: This document provides technical specifications and data for TOSS Pneumatic's manually-controlled linear adjustment units, specifically the SEK type, designed for machines requiring frequent adjustments such as packaging machines. The units are equipped with a clamping plate and are available in various design sizes.

Specifications:

Design Type: Linear ball guide
Design Sizes: 10/16/20, 25/32/40
Positioning Distance: 10, 25, 50, 80, 100, 125 mm
Threaded Spindle Pitch: 1.0, 1.5
Spindle Dimensions: M6 - LH, M10 - LH
Temperature Range: -10 to +70°C
Mounting Position: Any
Materials: Aluminum for base body, upper part, cover, plate; Ms 63 for protecting tube; Ms 58 for tube nut, spindle nut; VA for threaded spindle

Dimensions: Detailed dimensions are provided for each size, including various lengths (L1, L2, etc.) and diameters (D1, D2, etc.) for different positioning distances.

Admissible Stress: The document outlines the admissible stress for longitudinal, lateral, and transverse torque for each type and stroke length. Correction factors are also provided for different stroke lengths.

Example Calculation: An example is given for calculating the required force for a 32-SEK unit with a stroke length of 80 mm, using a longitudinal torque of 7.44 Nm and a correction factor.

Conclusion: The document provides comprehensive technical data and specifications necessary for the application and installation of SEK type linear adjustment units in various industrial settings.

Catalog excerpts

Adjustment units Type SEK Linear ball guide Design sizes 10/16/20 25/32/40 For machines frequently requiring adjustments, size changes, positioning, etc. (e.g. packaging machines), TOSS - Pneumatic produces special manually-controlled linear adjustment units. These adjustment units are supplied with a clamping plate.

Open the catalog to page 1

Adjustment unitsType SEK Dimensions: Size

Open the catalog to page 2

Adjustment units Admissible stress Longitudinal torque

Open the catalog to page 3

Adjustment unitsAdmissible stress Stroke [mm]

Open the catalog to page 4

Example of calculation: Given qty: 32 - SEK with a stroke length of 80 mm Lever arm L1 = 40 mm = 0,04 m Longitudinal torque Mi = 7,44 Nm Correction factor A = 103,2 mm = 0,1032 m All data based on tests conducted by TOSS.

Open the catalog to page 5

All TOSS GmbH & Co. KG catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list