CSX12M25CMP19
1 / 23Pages

Ultra-High-Resolution CMOS Color Camera CSX12M25CMP19 PRODUCT SPECIFICATION

Restriction For Use  Should the equipment be used in the following conditions or environments, give consideration to safety measures and inform us of such usage: 1.Use of the equipment in the conditions or environment contrary to those specified, or use outdoors. 2.Use of the equipment in applications expected to cause potential hazard to people or property, which require special safety measures to be adopted.  This product can be used under diverse operating conditions. Determination of applicability of equipment or devices concerned shall be determined after analysis or testing as...

Exemption Clauses  TELI assumes no responsibility or liability for damage arising from fire, earthquake, an act by a third party or other accidents, or intentional or careless error or misuse by the user, or use under abnormal conditions.  TELI assumes no responsibility or liability for incidental damages (e.g., loss of business profits or interruption of business) arising from use of or inability to use the camera equipment.  TELI assumes no responsibility or liability in the case damages or losses are caused by failure to observe the information contained in the operation manual and...

Notes on using this product  Handle carefully Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause malfunctions. Further, do not damage the connection cable, since this may cause wire breakage.  Environmental operating conditions Do not use the product in locations where the ambient temperature or humidity exceeds the specifications. Otherwise, image quality may be degraded or internal components may be adversely affected. In particular, do not use the product in areas exposed to direct sunlight. Moreover, during shooting under high...

Notes on using this product  Avoid intensive light Do NOT expose the camera's image-pickup-plane to sunlight or other intense light directly. If the part of CMOS sensor is exposed to spot-intensive light, you might get a picture problem like blooming and/or smear. Under the comparison at the same video output level, the shorter the exposure time setting, the more smear is generated.  Do not expose the camera’s image-pickup-plane to sunlight or other intense light directly. Its inner CMOS sensor might be damaged. Moreover the burn-in and the fades of the color filter of sensor might occur...

CAUTIONS ON USE  When disposing of the camera Wastes of this product should be separated and discarded in compliance with the various national and local ordinances. This camera is showing the following symbol to body due to EU environmental regulation (Waste Electrical and Electronic Equipment (WEEE)). However this symbol is applied to only an EU member state. Phenomena specific to CMOS sensor  Defective pixels A CMOS image sensor is composed of photo sensor pixels in a square grid array. Due to the characteristics of CMOS image sensors, over- or under-driving of the pixels results in...

1. Overview This CMOS camera is an Ultra-High-resolution color camera employing a 12,580 thousand pixel readout system CMOS sensor. 2. Features (1) High speed output at Ultra-High-resolution pixel. The TOSHIBA TELI’s proprietary 1.9 type 12,580 thousand pixel Ultra-High-resolution CMOS sensor outputs the entire 12,580 thousand pixels in a speed as high as 25fps. (2) Scalable mode Scalable of a partial readout function optimum to diversifying high-speed image processing is available. It supports a variable frame rate to increase the frame rate by reading an arbitrary area by specifying an...

3. Configuration (1) Camera body (2) Accessory Operation Manual (Japanese) ······································ × 1 Operation Manual (English) ········································· × 1 *Application software is not attached to this camera. 4. Option (1) CoaXPress cable （Recommended cable length: 60m or less） (2) Camera mounting kit CPTC12M (Manufactured by TOSHIBA TELI) (3) F mount lens adapter FTAR-2 (Manufactured by TOSHIBA TELI) *NOTE: Contact your dealer / distributor for details of option units. *Conformity of optional peripherals and EMC regulations The adaptability of the safety...

5. Specification [Electrical specification] (1) Imager ■ Number of active pixels ■ pixel size ■ Scanning area ■ Optical size ■ Color filter (2) Scanning system (3) Aspect ratio (4) Synchronization method (5) Sensitivity (6) Minimum object illuminance CMOS image sensor 4096 (H) x 3072 (V) 6 pm (H) x 6 pm (V) (Square-grid array) 24.576 mm(H) x 18.432 mm(V) Equivalent to 1.9 type RGB primary color mosaic-on-tip color filter Progressive 4:3 Internal synchronization 3000 lx, F4, 5000 K 125 lx (F2.8, GAIN: MAX, reading all pixels, image level: 50%, Shutter speed: 16msec) (7) Image...

■ OPWB (One Push White Balance) (12) Power supply voltage (13) Power consumption Manual (with OPWB function) Corrective Range : 3000K to 6500K Setting Method : Independent R/B Gain* Setting *Digital Gain Corrective Range : 3000K to 6500K Detect Area : Full Screen Detect Method : Average DC24 V ± 10 % (ripple 50 mV(p-p) or less) The power supply standing up must increase up to the stipulated voltage monotonously. Approx. 6.5 W [Electrical shutter specification] (1) Shutter Speed (2) Random Trigger Shutter ■ Fixed mode ■ Pulse width mode Shutter OFF or 1/20,000 to 2 sec The exposure...