32-Bit Microcontrollers TX00/TX03/TX04 Series
28Pages

SEMICONDUCTOR & STORAGE PRODUCTS

Toshiba’s ARM Core-Based Microcontrollers ARM Core-Based Microcontrollers Proven in the Global Market Microcontrollers with an ARM core are becoming increasingly popular not only for cell phone applications but also for general-purpose applications. Toshiba was the first Japanese vendor to release microcontrollers with an ARM Cortex™-M3 core. Now, Toshiba has become the first Japanese company to adopt two ARM processors, Cortex™-M0 and Cortex™-M4, in addition to Cortex™-M3 and released the TX00, TX03 and TX04 Series. Our product lineup includes microcontrollers with a broad spectrum of...

I Toshiba's ARM Cortex™-M0/M3/M4 Core-Based Microcontroller Lineup ^Underdevelopment «: Planned There are microcontrollers that do not contain some of the peripherals shown. For details, see appropriate datasheets Toshiba's ARM Core-Based Microcontrollers- - 2 Toshiba's ARM Core-Based Microcontroller •System block diagrams in this brochure only show the typical application examples. •NANO FLASH is a trademark of Toshiba are trademarks or registered trademarks of ARM Limited in the EU and other countries. •Bluetooth is a registered trademark owned by marks by Toshiba is under license....

TX04 Series/TX00 Series New Microcontrollers with ARM Cortex™-M4/M0 Core Features of the TX04 Series The ARM Cortex™-M4 core-based TX04 Series supports the Thumb®-2 and Thumb® instruction sets and provides DSP extensions and a floating-point unit (FPU) in order to deliver high energy efficiency. The TX04 Series also integrates a selection of Toshiba-original high-precision analog circuits on the same chip, making it ideal for mixed-signal applications such as digital still cameras, audio equipment, home appliances and sensor applications. Ideal for digital signal control Low power...

TX03 Series Features of the TX03 Series The TX03 microcontroller series embeds an ARM CortexTM-M3 core, which provides high code density and fast interrupt response times required for real-time applications. The TX03 Series also incorporates a Toshiba-proprietary NANO FLASHTM memory featuring high capacity and low power consumption. Hardware Vast product portfolio and field-proven solutions Extensive software resources Code Density Ideal for real-time control Instructions with long execution times can be suspended or canceled via interrupts. The hardware automatically pushes registers onto...

The M440 Group of microcontrollers are ideal for digital video camera and digital still camera applications. They incorporate analog circuits required for optical image stabilization, autofocus and auto-exposure control. The high-performance ARM Cortex™-M4 core provides high-speed computation functionality. Additionally, the servo controller (PSC) helps to improve system performance and reduce the CPU workload through parallel processing. High-performance ARM Cortex -M4 core: 100-MHz operation (max) Improved performance thanks to multiple computing units (MAC, FPU, PSC) Toshiba-original...

The TMPM061FWFG of the M060 Group is a microcontroller with a Cortex™-M0 core specifically designed for smart metering applications. It contains a Toshiba-original 24-bit delta-sigma AD converter and a power calculation engine for high-accuracy electricity metering. The Cortex™-M0 core provides high computational performance and low power consumption, but its cost is as low as that of conventional 8-bit and 16-bit microcontrollers. Moreover, the Cortex™-M0 core is supported by extensive software resources and an integrated development environment. This also helps to reduce non-recurring...

The M330 Group of microcontrollers are ideal for audiovisual applications. They incorporate a remote control signal receiving function and a Consumer Electronics Control (CEC) interface that remain active even in 32-kHz SLEEP mode. This helps to reduce standby power consumption of audiovisual systems. High-performance ARM CortexTM-M3 core: 40-MHz operation (max) Toshiba-original low-power consumption NANO FLASHTM memory: Fast programming Various serial interfaces CEC interface and remote control signal preprocessor that remain active even in SLEEP mode High-speed, high-accuracy 10-bit AD...

The M340 Group of microcontrollers are ideal for digital video camera, digital still camera and camera lens control applications. They incorporate analog circuits required for optical image stabilization, autofocus and auto-exposure control. The high-performance ARM CortexTM-M3 core provides high-speed computation functionality. Additionally, a high-resolution programmable phase generator (PPG) enables smooth and quiet motor operation. High-performance ARM Cortex -M3 core: 54-MHz operation (max) Toshiba-original NANO FLASHTM memory: Fast programming High-resolution PPG (programmable phase...

The base versions of the M360 Group include microcontrollers that offer large-capacity Flash ROM and up to 18 serial interface channels. The advanced versions also provide USB, CAN and EtherMAC interfaces, which are becoming de facto standards in embedded systems, as well as motor control capabilities. The M360 Group are ideal for a wide range of applications such as multifunction printers, audiovisual systems, industrial equipment and digital appliances. High-performance ARM CortexTM-M3 core: 80-MHz operation (max) Large-capacity embedded Flash ROM fabricated using Toshiba-original NANO...

Features of the TMPM369FDFG/XBG (Under Development) and TMPM369FYFG(Under Development)/XBG (Under Development) Controls various interfaces independently – Contributing to reduction of the CPU workload The TMPM369 has various external communication interfaces such as USB, USB Embedded Host, CAN, EtherMAC, SIO/UART, I2C/SIO and SSP (SPI mode). Additionally, the TMPM369 contains 2 units of AD converter and a programmable motor driver (PMD). All of them are designed to operate independently, significantly reducing the software workload. The TMPM369 provides Flash ROM of up to 512 KB and SRAM of...